牌号简介 About |
---|
EBALTA GH 781是一种耐热双组分环氧树脂,具有很低的热膨胀和较高的机械强度。EBALTA GH 781适用于浇铸铝载体(喷砂表面)。厚度为10-20毫米,可以获得具有良好导热性的高质量表面。使用固化剂GH 781,固化效果更好,因此固化时间更短。对于任何修改,维修和密封,我们也有一个油灰系统可用。通过该系统和HRS硬化剂厚度可达到5-6 mm。应用聚氨酯发泡工具耐热铸造型性能耐热短固化时间高强度低热膨胀 ebalta GH 781 is a heat resistant two components epoxy resin with very low thermal expansion and high mechanical strength. ebalta GH 781 is suitable to pour on a cast aluminium carrier (sandblast surface). With a thickness of 10-20 mm you get a high quality surface with good thermal conductivity. With hardener GH 781 S a better curing and therefore shorter curing time is reached. For any amendments, repairs and sealings we also have a putty system available. By means of this system together with HRS hardener thicknesses of 5-6 mm can be reached. Applications PU-foaming tools Heatable foundry patterns Properties heat resistant short curing time high strength low thermal expansion |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
收缩率 Shrinkage rate |
0.050 | % | 内部方法 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
6.0 到 8.0 | kJ/m² | ISO 179 |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
2.60 到 2.80 | g/cm³ | |
粘度 viscosity |
|||
25℃ 25℃ |
11 到 16 | Pa·s | |
固化时间 Curing time |
|||
20℃ 20℃ |
12 到 14 | hr | |
储存稳定性 storage stability 2 |
|||
20 ℃ 20 ℃ 2 |
min | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 7619 | ||
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
压缩强度 compressive strength |
MPa | ISO 604 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | DIN 53752 | |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 1000 g |
【新闻资讯】查看全部
化销华北加快高端医用树脂专用料推广
2022-05-06 1月至4月,化销华北强化对辖区内大型医药战略客户服务,助力燕山石化医用树脂专用料量效增长,助力客户医用树脂专用料进口替代率持续提升。 近年来,随着全球疫情防控常态化, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |