牌号简介 About |
---|
Bormed™ RG835MO是一种特殊改性的高熔体流动透明聚丙烯无规共聚物。该聚合物等级用于生产医疗和医疗相关物品。这种等级的产品需要低表面摩擦的内部润滑油。具有加工性好、透明度高、光泽度高、摩擦系数小、常温下刚度冲击平衡好等特点。除此之外,它还可以用环氧乙烷或蒸汽消毒,并且具有良好的耐化学性。除具有良好的物理性能和良好的透明度外,该等级产品还具有良好的可印刷性,易于脱模。 Bormed RG835MO is a resin intended for evaluation for use in Healthcare applications. Bormed RG835MO is a transparent polypropylene random copolymer with a high melt flow, modified with slip agent for products requiring a low surface friction. This grade is characterized by easy processability, high transparency, high gloss, controlled low friction and good stiffness-impact balance at ambient temperature. In addition it can be sterilized with ethylene oxide and steam. Applications Bormed RG835MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RG835MO . Needle hubs Needle protection Disposable non pre-filled syringes Caps and closures This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special Features Improved gloss High transparency Easy processability |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.905 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
30 | g/10min | ISO 1133 |
收缩率 Shrinkage rate |
1.0 to 2.0 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
6.0 | kJ/m² | ISO 179/1eA |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature 1 |
|||
0.45 MPa,未退火 0.45 MPa, unannealed 1 |
82.0 | ℃ | ISO 75-2/B |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ISO 527-1-2 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 527-2/50 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ISO 527-2/50 | |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ISO 2039-2 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Injection molded specimen |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |