牌号简介 About |
---|
一种耐用的橡胶状材料,具有良好的抗撕裂性和抗爆裂强度应用垫圈、软管和密封件,运动鞋耳模“软接触”,超塑握把具有橡胶般的灵活性,耐用和抗撕裂性,可在恶劣的环境中长期稳定良好的表面光洁度和特征细节,使用标准浸润剂创建彩色部件,迅速生产出具有橡胶和热塑性弹性体外观和手感的零件,消除了铸造、机加工或其他二次加工的时间和成本,解决了广泛的应用,需要橡胶样的灵活性和耐用性,解决了需要长期稳定性的最终用途,最低限度地解决了最终用途。每部分减少所需成本 A durable, rubber-like material with good tear resistance and burst strength Applications Gaskets, hoses and seals Athletic footwear Ear molds "Soft-touch," over molded grips Features Rubber-like flexibility Durable and tear-resistant Resists harsh environments Good long-term stability Excellent surface finish and feature detail Create colored parts using standard infiltrants Benefits Rapidly produce parts with the look and feel of rubber and thermoplastic elastomers Eliminate the time and cost of casting, machining or other secondary processes Address broad applications requiring rubber-like flexibility and durability Address end-use applications requiring long-term stability Minimal finishing required Reduced cost per part |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 2 |
0.440 | g/cm³ | ASTM D4164 |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
撕裂强度 tear strength 5 |
ASTM D624 | ||
23℃ 23℃ 3 |
15.1 | kN/m | ASTM D624 |
23℃ 23℃ 4 |
15.4 | kN/m | ASTM D624 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity 3 |
1.1E+14 | ohms | ASTM D257 |
体积电阻率 Volume resistivity 3 |
1.3E+14 | ohms·cm | ASTM D257 |
介电强度 Dielectric strength 3 |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant 3 |
|||
1 kHz 1 kHz 3 |
ASTM D150 | ||
耗散因数 Dissipation factor 3 |
|||
1 kHz 1 kHz 3 |
ASTM D150 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Burst Strength Burst Strength 6 |
|||
As Sintered,No infiltration:23℃ As Sintered,No infiltration:23℃ |
MPa | ||
FlexSeal Infiltration:23℃ FlexSeal Infiltration:23℃ |
MPa | ||
Two-Part Polyurethane Infiltration:23℃ Two-Part Polyurethane Infiltration:23℃ |
MPa | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ASTM D2240 | ||
邵氏 A Shaw's A 3 |
ASTM D2240 | ||
邵氏 A Shaw's A 4 |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
ASTM D638 | ||
-- -- 4 |
MPa | ASTM D638 | |
-- -- 3 |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
ASTM D638 | ||
断裂 fracture 3 |
MPa | ASTM D638 | |
断裂 fracture 4 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
ASTM D638 | ||
断裂 fracture 3 |
% | ASTM D638 | |
断裂 fracture 4 |
% | ASTM D638 | |
弯曲模量 Bending modulus |
ASTM D790 | ||
23℃ 23℃ 4 |
MPa | ASTM D790 | |
23℃ 23℃ 3 |
MPa | ASTM D790 | |
泰伯耐磨性 Taber abraser |
|||
1000 周期,1000 g,CS-17 转轮 1000 cycles, 1000 g, CS-17 wheels |
mg | ASTM D4060 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Tap |
3 As Sintered |
4 Infiltrated with FlexSeal (8 Dip Process) |
5 C 模具 |
6 25 mm ID x 2 mm thick x 300 mm long hose |
【新闻资讯】查看全部
浙江率先推行重点行业碳评价
2021-08-16 搜料网资讯: 按照浙江省生态环境厅发布的《浙江省建设项目碳排放评价编制指南(试行)》要求,自8月8日起,全省范围的九大重点行业在上马新项目时,要在环评中纳入碳排放评价。由 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |