牌号简介 About |
---|
Optema TC 220是一种乙烯-丙烯酸甲酯共聚物,可用于制造要求柔性和弹性的合金 、混配料和化合物。 它还是一种适用于要求在聚乙烯、聚丙烯、尼龙、聚二氯乙 烯或其他基材之间具有良好内层粘合性的共挤涂覆和挤压成层的卓越牌号。 加工 条件:在 260°C至300°C (500°F - 572°F)温度范围之间可获得卓越的挤出涂 覆效果。 建议加工温度不要高于320°C (608°F)。 Optema EMA可在传统的挤出 涂覆低密度聚乙烯用挤出设备上加工。 它广泛的热稳定范围使其适用于广泛的加 工条件。 挤出机的进料喉管处应采用水冷却以避免进料口桥接。 Optema TC 220 is an ethylene methyl acrylate copolymer, which can be used for making alloys, blends and compounds or be injection molded where softness and flexibility are required. It is also an excellent grade for coextrusion coating and extrusion lamination where good interlayer adhesion between polyethylene, polypropylene, nylon, PVdC or other substrates is required. Processing Conditions: Excellent results are obtained in extrusion coating at 260°C to 300°C (500°F - 572°F) temperature range. Processing temperatures above 320°C (608°F) are not recommended. Optema EMA can be processed on conventional extrusion equipment designed for extrusion coating LDPE. Their broad thermal stability range offer wide processing conditions window. Water cooling of extruder throat is preferred to avoid hopper bridging. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
5.0 | g/10min | ASTM D1238 |
甲基丙烯酸含量 Methacrylic acid content |
24.0 | wt% | ExxonMobil Method |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
43.0 | ℃ | ASTM D1525 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
锦湖三井化学公司将投资4000亿韩元扩大MDI生产
2021-04-23 搜料网资讯: 锦湖三井化学公司近日表示,它将投资约4000亿韩元(3.581亿美元),以扩大其在韩国西南部地区的化学品制造工厂。 韩国合成橡胶制造商锦湖石化和日本三井化学的合资公 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |