牌号简介 About |
---|
Formolene® HP3902是一种高性能共聚物,设计用于压力管道和导管应用。它有出色的管环ESCR和它包括一个紫外线稳定剂。Formolene® HP3902符合ASTM D4976-PE 225的所有要求。当与批准的颜色浓缩物混合时,Formolene® HP3902的电池等级为234373E,符合ASTM D3350-05的要求,被PPI列为PE2708材料,HDB在73°F时为1250 psi,在140°F时为1000 psi,符合气体管道的CAN/CSA标准B137.4-02和饮用水使用的NSF标准14/61的要求。Formolene® HP3902也符合旧的ASTM D3350-02A和PPI标准下的PE2406材料。Formolene® HP3902也符合ISO 9080的PE80材料要求。 Formolene® HP3902 is a high performance copolymer that is designed for pressure pipe and conduit applications. It has outstanding pipe ring ESCR and it incorporates a UV stabilizer. Formolene® HP3902 meets all requirements of ASTM D4976 - PE 225. When blended with the approved color concentrates, Formolene® HP3902 has a cell class of 234373E per ASTM D3350-05, is listed by PPI as a PE2708 material with HDB's of 1,250 psi @ 73°F and 1,000 psi @ 140°F, meets the requirements of CAN/CSA Standard B137.4-02 for gas pipe and NSF Standard 14/61 for use with potable water. Formolene® HP3902 also qualifies as a PE2406 material under the old ASTM D3350-02a and PPI standards. Formolene® HP3902 also qualifies as a PE80 material per ISO 9080. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.939 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
ASTM D1238 | ||
190℃,2.16kg 190℃,2.16kg |
0.20 | g/10min | ASTM D1238 |
190℃,21.6kg 190℃,21.6kg |
20 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
100%非离子洗涤剂,模压成型,F50 100% non-ionic detergent, molded, F50 |
> 5000 | hr | ASTM D1693A |
100%非离子洗涤剂,模压成型,F50 100% non-ionic detergent, molded, F50 |
> 5000 | hr | ASTM D1693B |
100%非离子洗涤剂,模压成型,F50 100% non-ionic detergent, molded, F50 |
hr | ASTM D1693C | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
断裂,模压成型 Fracture, molded 2 |
MPa | ASTM D638 | |
屈服,模压成型 Yield, molding 2 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 2 |
|||
断裂,模压成型 Fracture, molded 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
模压成型 Compression Molding |
MPa | ASTM D3350 | |
模压成型 Compression Molding |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
裂纹缓慢扩展 PENT - slow crack growth PENT - slow crack growth |
hr | ASTM F1473 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 4, 2.0 in/min |
【新闻资讯】查看全部
科思创突破性资料提升ABC柱功能
2017-10-10 一、现代消费催生未来汽车概念 汽车行业的飞速发展,令这一曾经只是传统意义上的代步工具,转身变成 了人们生活中不可分割的一部分,甚至成为了彰显个人品味的新标签。越来越 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |