牌号简介 About |
---|
丙烯与乙烯在复合金属有机催化剂作用下共聚得到的产物。它包括长期热稳定性的提高,生产、加工和开发聚丙烯制品时的热氧化降解阻力,提高透明度,提高抗静电性能。用途:挤出、热成型、注射吹塑、单层复合板。技术要求:TU 2211-136-05766801-2006 Product obtained by copolymerization of propylene and ethylene in presence of complex metalorganic catalysts. It incorporates high thermal-oxidative degradation resistance during PP production, processing and use of PP-made articles, improved transparency, improved antistatic properties. Application: extrusion, thermal molding, injection-blow molding, single and multi layer sheets. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | |
表观密度 Apparent density |
0.48 到 0.60 | g/cm³ | |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
5.0 到 7.0 | g/10min | ASTM D1238 |
灰份含量 Ash Content |
0.025 到 0.050 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
30 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp 2 |
℃ | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Thermal Creep Temperature Thermal Creep Temperature 3 |
℃ | ||
热氧化恶化 Thermal oxidation deterioration |
|||
150℃ 150℃ |
day | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
|||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 in liquid medium under force 10 H |
3 at load 0.46 H/mm² |
【新闻资讯】查看全部
内蒙古乌海打造全国重量级可降解塑料产业基地
2022-08-26 扫描上图二维码,可以免费下载 搜料 APP 目前,作为可降解塑料基础产业的BDO生产企业已建成投产或正在全面建设。未来将在该地区形成300万吨的生产能力。乌海市正在建设具有全国重 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |