牌号简介 About |
---|
Versalloy™ XL 9055-1 是一种 TPV 合金,具有极强的流动性和表面美学效果,适合于多种应用。 非常适合于狭长的流道 着色能力极强 可以重叠模塑方式粘接在聚丙烯上 表面美学效果极佳 Versalloy™ HC 9210-55N is a TPV alloy targeted for injection molding healthcare applications such as disposable medical items, syringe stoppers, and soft-touch overmolding onto surgical grips. Product exhibits exceptional flow properties and surface aesthetics. * Excellent Flow for Long, Thin Flow Paths * Exceptional Colorability * Overmold Adhesion to Polypropylene * Superior Surface Aesthetics * USP Class VI (please see Notes) |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,10 秒 Shore A, 10 seconds |
53 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 3 , 4 |
ASTM D412 | ||
断裂,23℃ Fracture, 23 ℃ 3 , 4 |
4.00 | MPa | ASTM D412 |
100% 应变,21℃ 100% strain, 21 ℃ |
1.44 | MPa | ASTM D412 |
300% 应变,23℃ 300% Strain, 73°F |
2.31 | MPa | ASTM D412 |
拉伸应变 Tensile strain 3 , 4 |
|||
断裂,23℃ Fracture, 23 ℃ 3 , 4 |
610 | % | ASTM D412 |
撕裂强度 tear strength 3 , 4 |
|||
21℃ 21℃ 3 , 4 |
kN/m | ASTM D624 | |
压缩形变 Compression deformation |
ASTM D395B | ||
23℃,22 hr 23℃,22 hr |
% | ASTM D395B | |
70℃,22 hr 70℃,22 hr |
% | ASTM D395B | |
100℃,22 hr 100℃,22 hr |
% | ASTM D395B | |
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
g/cm³ | ASTM D792 | |
收缩率 Shrinkage rate |
|||
MD MD |
% | ASTM D955 | |
熔体表观粘度 Apparent viscosity of melt |
|||
200℃,11200 sec^-1 200℃,11200 sec^-1 |
Pa·s | ASTM D3835 |
备注 |
---|
1 Based on the USP Class VI testing conducted on representative grades (HC 9210-45N and HC 9210-70N), this grade should meet USP Class VI requirements for plastics. Please contact PolyOne GLS Thermoplastic Elastomers for a complete copy of the GLS Healthcare Policy. 1. The Customer must notify GLS of any FDA Class I and/or European Union Class I medical devices for each specific product and application. 2. The Customer shall not knowingly manufacture, use, sell or otherwise supply, directly or indirectly products or compounds made from GLS products in any of the following without prior written approval by GLS for each specific product or application: a. Cosmetics b. Drugs and other Pharmaceuticals c. Temporary or permanent implantation in the human body, regardless of the intended duration of implantation d. Class II and Class III Medical Devices as defined in 21 CFR 860.3 ("Medical Devices") e. Class IIa, IIb and III as defined in Directive 93/42/EEC |
2 一般属性:这些不能被视为规格。 |
3 C 模具 |
4 2 小时 |
【新闻资讯】查看全部
扬子石化累计消费PTA产品超8.4万吨
2018-10-24 今年下半年以来,PTA市场行情一路向好,是增产创效的绝佳时机。扬子石化化工厂抓住机遇,在4月份重启PTA二线的基础上,争分夺秒完成了PTA三线空压机检修任务,并于9月初投料开车,开启了二、三线同时高负荷运行模式。9月份,扬子石化累计生产PTA产品超8.4万吨,创下近3年来装置单月最高产量新纪录,实现了增产盈利创效的目的。 近期,国内聚酯产销回落,但相较于年初,PTA价格仍处于高位,并保持窄幅震荡,市场形势持续利好。有鉴于此,为了抢抓增效市场机遇,国内各PTA生产商均处于高负 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |