![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/downloads-img2.png)
公司信息及水印
![](/page/pc/images/result/downloads-img4.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img3.png)
牌号简介 About |
---|
Braskem PE SLH218 SLH218是Braskem生产的LLDPE己烯共聚物。它在光学性能、机械性能(主要是拉伸性能)、密封性和加工性之间显示出良好的平衡。含有非常低的凝胶。该等级的最低生物基含量为84%,根据ASTM D6866测定。Braskem PE SLH218说明:SLH218是Braskem生产的LLDPE己烯共聚物。它在光学性能、机械性能(主要是拉伸性能)、密封性和加工性之间显示出良好的平衡。含有非常低的凝胶。该等级的最低生物基含量为84%,根据ASTM D6866测定。添加剂:无滑脱防结块无应用:拉伸薄膜;衬里;低密度聚乙烯和高密度聚乙烯混合物;通用包装;其他应用:低和中张力交联聚乙烯电线和电缆的绝缘;灌溉管道的混合物。工艺:铸膜挤出 Braskem PE SLH218 SLH218 is a LLDPE that shows a good balance between optical properties, mechanical properties (Mainly stretchability), sealability and processability. Very low gel contained. The minimum biobased content of this grade is 84%, determined according to ASTM D6866. Additive: Slip Absent Antiblock Absent Applications: Stretch films; Liners; LDPE and HDPE blends; packages for general use; Others applications: insulation for low and medium tension XLPE wires and cables; blends for irrigation pipes. Process: Cast Film Extrusion Braskem PE SLH218 SLH218 is a LLDPE that shows a good balance between optical properties, mechanical properties (Mainly stretchability), sealability and processability. Very low gel contained. The minimum biobased content of this grade is 84%, determined according to ASTM D6866. Additive: Slip Absent Antiblock Absent Applications: Stretch films; Liners; LDPE and HDPE blends; packages for general use; Others applications: insulation for low and medium tension XLPE wires and cables; blends for irrigation pipes. Process: Cast Film Extrusion Braskem PE SLH218 SLH218 is a LLDPE that shows a good balance between optical properties, mechanical properties (Mainly stretchability), sealability and processability. Very low gel contained. The minimum biobased content of this grade is 84%, determined according to ASTM D6866. Additive: Slip Absent Antiblock Absent Applications: Stretch films; Liners; LDPE and HDPE blends; packages for general use; Others applications: insulation for low and medium tension XLPE wires and cables; blends for irrigation pipes. Process: Cast Film Extrusion |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.916 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
2.3 | g/10min | ASTM D1238 |
Biobased Content Biobased Content |
84 | % | ASTM D6866 |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
TD,断裂,38 µm,吹塑薄膜 TD, fracture, 38 µ m, blow molded film |
40.0 | MPa | ASTM D882 |
MD,断裂,38 µm,吹塑薄膜 MD, fracture, 38 µ m, blow molded film |
40.0 | MPa | ASTM D882 |
拉伸应变 Tensile strain |
|||
TD,断裂,38 µm,吹塑薄膜 TD, fracture, 38 µ m, blow molded film |
% | ASTM D882 | |
MD,断裂,38 µm,吹塑薄膜 MD, fracture, 38 µ m, blow molded film |
% | ASTM D882 | |
弯曲模量 Bending modulus |
|||
1% 正割,TD,38 µm,吹塑薄膜 1% secant, TD, 38 µ m, blow molded film |
MPa | ASTM D790 | |
1% 正割,MD,38 µm,吹塑薄膜 1% secant, MD, 38 µ m, blow molded film |
MPa | ASTM D790 | |
落锤冲击 Drop hammer impact |
|||
38 µm,吹塑薄膜 38 µ m, blow molded film |
g | ASTM D1709 | |
撕裂强度 tear strength |
|||
MD,38 µm,吹塑薄膜 MD, 38 µ m, blow molded film |
g | ASTM D1922 | |
埃尔曼多夫抗撕强度 Elmandorf tear strength |
|||
TD,38 µm,吹塑薄膜 TD, 38 µ m, blow molded film |
g | ASTM D1922 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 F50 |
【新闻资讯】查看全部
英威达公司结合公益金会为Deweyville学校提供设备
2016-10-12 英威达公司最近为Deweyville学校捐献出100台电脑显示器,供其学生能在教室使用。英威达公司联合公益金会来鉴定识别Deweyville 显示器,以替代今年早些时候被洪水冲毁坏的设备。Deweyville中高级学校校长Brad Haeggquist,说道,“我们非常感谢英威达公司为我们学校提供显示器设备,让我们能够暂时对外开放小学办公区域。” 英威达公司已帮助我们的老师和学生们战胜了他们之前经历过的一些困难。 据英威达公司网站经理约翰逊说道,“英威达致力于丰富公司员工工 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |