牌号简介 About |
---|
Epolene® E-43P是一种马来酸酐接枝聚丙烯粉末,推荐用作聚丙烯(PP)复合材料的偶联剂,并用于提供地板饰面乳液的防滑性。由于极性和酸酐功能性,Epolene® E-43P可用于层压,作为聚丙烯与尼龙或EvoH共混物的增容剂,并可用于增强复合材料的强度,该复合材料利用玻璃、滑石粉、碳酸钙和金属等增强材料/填料。 Epolene E-43P is a maleic anhydride grafted polypropylene powder recommended as a coupling agent for polypropylene (PP) composites and for providing slip resistance in floor finish emulsions. Because of the polarity and anhydride functionality, Epolene E-43P is useful for laminating, as a compatibilizer for PP blends with nylon or EVOH, and for enhancing the strength of composites that utilize reinforcements / fillers such as glass, talc, calcium carbonate, and metals. |
技术参数 Technical Data | |||
---|---|---|---|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
软化温度 Softening temperature |
|||
Mettler Mettler |
158 | ℃ | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
渗透硬度 Penetration hardness 3 |
|||
25℃ 25℃ 3 |
< 100 | mm | ASTM D5 |
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
酸值 acid value |
45.00 | mg KOH/g | |
Molecular Weight Molecular Weight 2 |
9100 | ||
熔体表观粘度 Apparent viscosity of melt |
|||
190℃ 190℃ |
300 | mPa·s | |
125℃ 125℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards |
3 Needle under 100-g load for 5s, tenths of mm |
【新闻资讯】查看全部
联合国宣布开展全球反塑料净化举动
2018-12-05 12月4日,在位于纽约的联合国总部,挪威常驻联合国副代表玛丽・斯卡勒、第73届联合国大会主席埃斯皮诺萨、安提瓜和巴布达总理加斯顿・布朗(从左至右)在新闻发布会后合影。 第73届联合国大会主席埃斯皮诺萨4日 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |