牌号简介 About |
---|
PM9630酚醛树脂是一种单级玻璃纤维和矿物填充的专用模塑料。它特别适用于要求高强度和尺寸稳定性的应用场合,具有优异的电绝缘性能和良好的耐热性和机械性能。典型应用包括线圈、开关和刷架。JIS型HM-R PM 9630 Phenolic is a single stage glass fiber, and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and dimensional stability with excellent electric insulation property and good heat resistance and machine ability. Typical applications include coil bobbins, switches and brush holders. JIS Type HM-R |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.82 | g/cm³ | JIS K6911 |
表观密度 Apparent density |
0.41 | g/cm³ | JIS K6911 |
收缩率 Shrinkage rate |
|||
MD:传递模塑 MD: Transfer molding |
0.40 | % | JIS K6911 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.20 | % | JIS K6911 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弯曲强度 bending strength |
186 | MPa | JIS K6911 |
压缩强度 compressive strength |
MPa | JIS K6911 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
kJ/m² | JIS K6911 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | JIS K6911 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength 2 |
kV/mm | JIS K6911 | |
绝缘电阻 insulation resistance |
JIS K6911 | ||
-- -- 3 |
ohms | JIS K6911 | |
-- -- 4 |
ohms | JIS K6911 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
0.40 mm 0.40 mm |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 60 V/sec |
3 Before Boiling |
4 After Boiling |
【新闻资讯】查看全部
国家发改委:把碳达峰碳中和摆在环资工作突出位置
2022-01-14 搜料网资讯: 记者从国家发改委获悉,国家发改委环资司召开专题会议研究碳达峰碳中和工作。 会议指出,推进碳达峰碳中和是党中央经过深思熟虑作出的重大战略决策,是我国对国际 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |