牌号简介 About |
---|
刚性DI-PAK R-4307是一种高性能、长使用寿命的封装化合物,用于需要高物理强度和优良电气性能的封装/封装单元。DI-PAK R-4307是一款在最恶劣的条件下保持其机械和电气性能的产品。这是由于它的低吸水性、抗热震性和在高温下保持强度。 RIGID DI-PAK R-4307 A high performance, long working life potting compound for potting/encapsulating units requiring high physical strength and excellent electricals. DI-PAK R-4307 is a holds its mechanical and electrical properties while under the most severe conditions. This is due to its low water absorption, thermal shock resistance, and retention of strength at elevated temperatures. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.62 | g/cm³ | ASTM D4669 |
收缩率 Shrinkage rate |
|||
MD MD |
0.10 到 0.35 | % | ASTM D2566 |
Weight(per cubic inch) Weight(per cubic inch) |
27 | g | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
25 | J/m | ASTM D256 |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
38 | J/m | ASTM D256 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
100 kHz 100 kHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
25℃,100 kHz 25℃,100 kHz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
3.00 mm 3.00 mm |
UL 94 | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
cP | ASTM D4878 | |
脱模时间 stripping time |
|||
121℃ 121℃ |
min | ||
胶凝时间 Gelation time 2 |
|||
25℃ 25℃ 2 |
day | ASTM D2971 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
导热系数 Thermal conductivity coefficient |
W/m/K | ||
使用温度 Operating temperature |
℃ | ||
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
备注 |
---|
2 100 g |
【新闻资讯】查看全部
2018年我国聚碳酸酯毛利受本钱及行情的影响
2018-07-17 2018年我国聚碳酸酯毛利受成本及行情的影响,呈现持续大幅下滑的态势,至目前年内塑料原料PC平均毛利在8400元/吨,年内跌幅在47%。 2018年单月份来看,平均毛利最低月份在7月份,截至目前在5525元/吨;最高月份在2月份,达到10106元/吨;变化幅度最大的是4月份,月内平均毛利跌幅达到16%。 近几年,塑料原料PC市场得益于2015年受酚酮装置扩产BPA成本下降、国内需求快速增长带来行情的明显提升、 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |