牌号简介 About |
---|
是一种密度为0.950-.955,熔融指数为0.2-.35的部分熔融体。我们的优质高密度聚乙烯250具有良好的刚度和抗应力开裂性能。它重量轻,坚固耐用,是许多内部或外部零件的理想选择。应用:优质高密度聚乙烯250是形成托盘,食品包装,小衬垫,或任何其他需要低温影响的零件的理想选择。它还适用于小型草坪拖拉机部件和许多其他小型工具部件。加工:这是一种晶体材料,因此它比非晶态材料需要更多的关注。建议在温度控制的铝质工具上成型,并进行喷砂处理,在装饰线外侧设置护城河。成型温度应为300-350°F。工具温度。应为160-190°F。表面处理:可采用水射流对优质高密度聚乙烯250进行钻孔、布线、穿孔、锯切、模切、激光切割或切割。可使用机械紧固件和螺钉。联系3M公司了解有关粘合的信息。注意,CLTE高于其他热塑性材料。请与Primex塑料公司代表联系,了解有关表面处理、制造或热成型工艺的更多信息。颜色、纹理和性能:优质高密度聚乙烯250可以颜色匹配,以满足您的特定要求。提供厚度为0.015-0.425、宽度为169”的优质高密度聚乙烯250。纹理包括:rm、h/c、levant l、ii、l l l和seville。 Is a fractional melt with a density of .950 - .955 and a melt index of .2 -.35. Our Prime HDPE 250 offers characteristics such as good stiffness and stress crack resistance. Along with being light weight and tough, it is an ideal selection for many interior or exterior parts. Applications: Prime HDPE 250 is ideal for forming trays, food packaging, small dunnage, or any other parts that requires cold temperature impact. It also works well for small lawn tractor parts, and many other small tool components. Processing: This is a crystalline material, therefore it requires more attention than an amorphous material. It is recommend that it be formed on an aluminum tool that is temperature controlled, grit blasted and with a moat on the outside of the trim line. The forming temperature should be 300-350°F. The tool temp. should be 160-190°F. Finishing: Prime HDPE 250 may be drilled, routed, punched, sawed, die cut, laser cut, or cut using water jet. Mechanical fasteners and screws may be used. Contact the 3M company for information on bonding. Caution, the CLTE is higher than other thermoplastic materials. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Prime HDPE 250 can be color matched to meet your specific requirements. Prime HDPE 250 is offered in thicknesses of .015 - .425 and widths of up to 169". Textures include; RM, H/C, Levant l, II, & lll and Seville. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.953 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
0.25 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
F50 F50 |
45.0 | hr | ASTM D1693A |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
27.6 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
600 | % | ASTM D638 |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
0.38 mm 0.38 mm 2 |
UL 94 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Tool Temperature Tool Temperature |
℃ | ||
成型温度 Forming temperature |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 >0.015 in |
【新闻资讯】查看全部
恒逸石化40万吨/年己内酰胺扩能改造项目投产
2019-08-12 恒逸石化8月8日发布公告称,其子公司浙江巴陵恒逸己内酰胺有限责任公司(以下简称恒逸己内酰胺公司)投资建设的40万吨/年己内酰胺扩能改造项目已于近日建成并正式投产运行。 至 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |