牌号简介 About |
---|
TC-808A/B是一种低粘度、快速凝固、刚性聚氨酯化合物。这个系统能迅速固化成坚硬的铸件。TC-808 A/B在固化期间和固化后通常对水分不敏感,如果需要进行阶段浇注,则很容易与自身结合。在需要“热塑性手感”的应用中,建议使用TC-808 A/B。 TC-808 A/B is a low viscosity, rapid setting, and rigid urethane compound. This system will cure quickly to a hard, tough casting. TC-808 A/B is generally insensitive to moisture during and after cure and will readily bond to itself if stage pours are required. TC-808 A/B is recommended in applications where a "thermoplastic feel" is desired. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- 2 |
1.02 | g/cm³ | |
-- -- |
1.08 | g/cm³ | ASTM D792 |
-- -- 3 |
1.14 | g/cm³ | |
收缩率 Shrinkage rate 4 |
|||
MD MD 4 |
0.40 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
28 | J/m | ASTM D256 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电常数 Dielectric constant |
|||
1 MHz 1 MHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
1 MHz 1 MHz |
ASTM D150 | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
cP | ||
25℃ 25℃ 3 |
cP | ||
25℃ 25℃ 2 |
cP | ||
脱模时间 stripping time |
|||
25℃ 25℃ |
min | ||
工作时间 working hours 5 |
|||
25℃ 25℃ 5 |
min | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
|||
25℃ 25℃ |
day | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
球压测试 Ball pressure test |
|||
75℃,1.7 mm 75℃,1.7 mm |
IEC 60695-10-2 | ||
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
贮藏期限 Storage period |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Part B |
3 Part A |
4 12" x 1/2" x 1/2" |
5 100g mass |
【新闻资讯】查看全部 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |