牌号简介 About |
---|
利安德巴塞尔澳大利亚人聚丙烯HP301R是一种具有改性分子量分布的大流量均聚物,采用通用添加剂包装配制而成。HP301R主要用于快速循环注塑成型,其中良好的流动性和低翘曲是重要的。典型的应用包括闭包、具有易翘曲的平坦表面的产品,以及要求良好韧性的均聚物应用。 LyondellBasell Australia's polypropylene HP301R is a high flow homopolymer with a modified molecular weight distribution and is formulated with a general-purpose additive package. HP301R is primarily intended to be used for fast cycle injection moulding where good flow and low warpage is important. Typical applications include closures, items having flat surfaces prone to warping, and homopolymer applications requiring good toughness. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.90 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃ 230℃ |
22 | g/10min | ISO 1133 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
51 | ℃ | ISO 75-2/Af |
0.45 MPa,未退火 0.45 MPa, unannealed |
75 | ℃ | ISO 75-2/Bf |
维卡软化温度 Vicat Softening Temp |
155 | ℃ | ISO 306 |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
NC color NC color |
HB | UL-94 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
kJ/m² | ISO 180-1A | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ISO 868 | ||
拉伸强度 tensile strength |
|||
23℃ 23℃ |
MPa | ISO 527-2 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ISO 178 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
新型高强度工程塑料3D打印机精度低于0.1mm
2021-06-14 搜料网资讯: 据悉,中科院宁波材料所增材制造课题组最近研发出可用于耐高温、高强度工程的桌面级3D打印机,并在尼龙3D打印方面取得最新进展,成型件力学性能接近注塑件水平。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |