牌号简介 About |
---|
推荐用于与定向聚丙烯(OPP作为连接层或密封剂)共挤的包装应用的单层和共挤涂层,与Primacor聚合物共挤,作为一种经济有效的箔或PET密封剂,符合美国食品和药物管理局的要求。有关完整的详细信息,请参考法规。(见注释)AFFINITY™ PT 1450G1P聚烯烃塑性体是通过内部技术生产的。它是一种用于单层共挤涂层的乙烯-α-烯烃树脂,具有优异的低温密封起始性、极限密封强度、对OPP的粘附性和良好的味道和气味性能。注:食品接触物品的制造商有责任确保该物品适合其预期用途。制造商应该意识到高油含量的食品可能会损害包装的完整性。 Monolayer and coextrusion coating for packaging applications Recommended for use with Oriented Polypropylene (OPP as a tie layer or sealant) Coextruded with acid copolymer as a cost effective foil or PET sealant Complies with U.S. FDA Consult the regulations for complete details. (See notes) AFFINITY PT 1450G1P Polyolefin Plastomer is produced via INSITE™ echnology. It is an ethylene alpha-olefin resin for monolayer and coextrusion coating that offers excellent low temperature seal initiation, ultimate seal strength, adhesion to OPP and good taste and odor performance. Note: It is the responsibility of the manufacturer of the food contact article to ensure the article is suitable for its intended use. Manufacturers should be aware that foods with a high oil content may compromise the integrity of the packaging. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.902 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
8.5 | g/10min | ASTM D1238 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
大亚湾公示百万吨乙烯项目环评
2018-11-06 一、建设项目概要 建设项目名称:埃克森美孚惠州化工综合体项目; 项目性质:新建。 建设地点:广东省惠州大亚湾石化工业区A1,A2, A3,B1,B2,B3,C1,C2地块。 建设内容:本项目为原油直接裂解制乙烯及下游高性能聚合物产品项目,计划规模为年产120万吨聚合级乙烯和80万吨聚合级丙烯。主要装置包括原油蒸汽裂解联合装置、线性低密度聚乙烯装置、低密度聚乙烯装置、抗冲聚丙烯装置、均聚聚丙烯等装置,以及配套的公用工程、储运包装 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |