牌号简介 About |
---|
8熔融流中抗冲共聚物聚丙烯Pinnacle聚合物聚丙烯2108采用Unipol PP技术,采用气相流化床反应器和高活性催化剂系统,以确保统一的物理性能和批次一致性。本产品适用于需要韧性和低温冲击强度的板材挤压、热成型容器和注塑应用。2108产品提供:优良的清洁度、优良的韧性、优良的颜色和工艺稳定性、良好的熔融强度、UL认证的Pinnacle's 2108聚丙烯被美国FDA食品接触通知864涵盖。因此,如21 CFR 176.170表1和表2所述,该聚合物可在使用a-h条件下与所有食品类型接触。该聚合物还符合21 CFR 177.1520(c)、第3.1(a)和3.2(a)项的要求。 8 MELT FLOW MEDIUM IMPACT COPOLYMER POLYPROPYLENE Pinnacle Polymers Polypropylene 2108 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This product is intended for sheet extrusion, thermoformed containers, and injection molding applications where toughness and cold temperature impact strength are required. The 2108 product provides: Excellent cleanliness Superior toughness Excellent color and process stability Good melt strength UL Listed Pinnacle's 2108 polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
8.0 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD MD |
1.5 | % | ASTM D955 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 3 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 3 |
24.2 | MPa | ASTM D638 |
拉伸应变 Tensile strain 3 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 3 |
11 | % | ASTM D638 |
弯曲模量 Bending modulus 4 |
|||
1% 正割,3.20 mm,注塑成型 1% cut, 3.20 mm, injection molded 4 |
MPa | ASTM D790-A | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch 5 |
|||
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding 5 |
kJ/m² | ASTM D256 | |
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding 5 |
J/m | ASTM D256 | |
落锤冲击 Drop hammer impact 6 |
|||
-30℃ -30℃ 6 |
J | ASTM D5420 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1, 2.0 in/min |
3 类型 1, 0.050 in/min |
4 Type I |
5 方法G, 几何形状GC |
【新闻资讯】查看全部
亚洲化学品市场多产品供不应求
2021-04-20 搜料网资讯: 随着亚洲经济复苏步伐加快导致需求不断增长,而多家供应商近期陆续关闭工厂,亚洲化学品市场多种产品出现供应紧张,比如聚乙烯(PE)和苯。国际货币基金组织(IMF)将亚 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |