牌号简介 About |
---|
该产品是聚氨酯系统。使用添加剂dt,铸造树脂gm 972也可作为一种可刷和过去的表面树脂。我们建议每1000公斤添加10-12克DT。当使用肖氏硬度较低的GM 972时,我们建议使用硬化剂PUR 11(肖氏硬度:肖氏A 78±3)。弹性元件真空铸造件模具用于塑料浇注模具石膏型定型蜡模用PU泡沫固定物性能邵氏A型硬度86井浇注高强度冷挠性易染性 The product is a Polyurethane system. With the additive DT the casting resin GM 972 can also be used as a brushable and past-like surface resin. We recommend 10-12 g additive DT per 1,000 kg. When using GM 972 with a lower shore hardness we recommend the hardener PUR 11 (shore hardness: shore A 78±3). Applications elastic component Vacuum casting parts Casting mould for gypsum Casting mould for plastic Casting mould for wax Casting mould for PU-foam fixtures Properties Shore A hardness 86 well castable high strength cold flexible easily dyeable |
技术参数 Technical Data | |||
---|---|---|---|
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
撕裂强度 tear strength |
45 到 55 | kN/m | ISO 34-1 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
按重量计算的混合比: 100 | ||
硬化法 Hardening method |
按重量计算的混合比: 45 | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
1.08 到 1.12 | g/cm³ | |
固化时间 Curing time |
|||
20℃ 20℃ |
3.0 到 5.0 | hr | |
储存稳定性 storage stability 2 |
|||
20 ℃ 20 ℃ 2 |
min | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ISO 7619 | ||
拉伸强度 tensile strength |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 200 g |
【新闻资讯】查看全部
赢创将在十月完成疏水剂和聚氨酯增稠剂欧洲扩能
2022-09-28 扫描上图二维码,可以免费下载 搜料 APP 赢创涂料添加剂正在改进TEGO Phobe疏水剂和TEGO Viscoplu聚氨酯增稠剂的两个生产装置将扩建。预计该装置将于10月竣工并投入使用。据报道,上述两 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |