牌号简介 About |
---|
任务4是一种独特的聚氨酯铸造树脂,当在0.03“到0.50”(0.075cm到1.27cm)的超薄截面中铸造时,其强度非常高。任务4的混合粘度非常低,即使是最精细的细节也能完美地捕捉到。固化塑料具有很低的收缩率,这就是为什么这种塑料成为世界各地的原型和设计专业人士的最爱。使用寿命为20分钟,在73°F/23°C下固化时间为16小时。通过添加如此强烈的色彩,可以产生鲜艳的颜色和色彩效果。由任务4制成的完全固化的模型坚硬、耐用、可加工和可上漆。它们能抵抗潮湿和温和的溶剂。任务4的应用包括制作原型和建筑模型、模型玩具、耐用微型模型、超薄机械零件和特效道具。 TASK® 4 is a unique polyurethane casting resin that is very strong when cast in Ultra-Thin sections ranging from 0.03" to 0.50"(0.075cm to 1.27cm). TASK® 4 has a very low mixed viscosity, ensuring flawless pick-up of even the finest detail. Cured plastic exhibits very low shrinkage which is why this plastic has become a favorite of prototype and design professionals throughout the world. Pot life is 20 minutes and cure time is 16 hours at 73°F/23°C. Vibrant colors and color effects are possible by adding SO-Strong® color tints. Fully cured models made from TASK® 4 are tough, durable, machinable and paintable. They resist moisture and mild solvents. Applications for TASK® 4 include making prototype and architectural models, model toys, durable miniatures, ultra-thin mechanical parts and special effect props. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.16 | g/cm³ | ASTM D1475 |
特定体积 Specific volume |
0.863 | cm³/g | ASTM D1475 |
收缩率 Shrinkage rate |
|||
MD MD |
0.35 | % | ASTM D2566 |
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脱模时间 stripping time 2 |
|||
23℃ 23℃ 2 |
960 | min | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
混合比 Mixing ratio |
100A:100B by weight | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩模量 Compression modulus |
MPa | ASTM D695 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
储存稳定性 storage stability |
|||
23℃ 23℃ |
min | ASTM D2471 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Cure Time |
【新闻资讯】查看全部
揭开面纱!K 2016,伊之密将打这些牌!
2016-09-12 三年一届的K展,全球最大的橡塑行业盛会,将在德国杜塞尔多夫上演。来自59个国家的3220家参展商将参加展出,其中中国展商368家。伊之密作为中国展商之一,今年第二次出征K展,就在全球同行为K展摩拳擦掌的时候,伊之密将以什么样的面孔亮相,好打一场漂亮的仗?下面伊哥小编为你揭开面纱。 UN800DP二板式注塑机 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |