公司信息及水印
牌号简介 About |
---|
Premi-Glas® 2200-15 CR-SX是一种用于电气、阻燃和暖通空调应用的玻璃纤维增强热固性片状模塑料。主要特点和优点:可着色,适合彩色模铸;具有模具纹理的最佳外观。尺寸稳定性好,包括优良的热阻。最小厚度为1.5毫米的UL 94-5伏阻燃性。在涉及紫外线暴露和水浸的外部应用中考虑UL746C。文件E42524。 Premi-Glas® 2200-15 CR-SX is a fiberglass reinforced thermoset sheet molding compound for electrical, flame retardant, and HVAC applications. Key Features and Benefits: Pigmentable for molded-in color; best appearance with mold texture. Good dimensional stability, including excellent thermal resistance. UL 94-5V flame resistance at 1.5mm minimum thickness. Subject to UL746C for consideration in exterior applications involving UV exposure and water immersion. File E42524. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.70 到 1.85 | g/cm³ | |
收缩率 Shrinkage rate |
0.15 | % | ISO 2577 |
MD MD |
0.15 到 0.35 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
模压成型 Compression Molding |
8960 | MPa | ASTM D638 |
拉伸强度 tensile strength |
|||
模压成型 Compression Molding |
31.0 | MPa | ASTM D638 |
弯曲模量 Bending modulus |
|||
模压成型 Compression Molding |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
模压成型 Compression Molding |
MPa | ASTM D790 | |
泊松比 Poisson's ratio |
|||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
模压成型 Compression Molding |
J/m | ASTM D256 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
模压成型 Compression Molding |
J/m | ASTM D4812 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD 1 |
1/℃ | ||
TD TD 2 |
1/℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ||
相对温度指数 Relative temperature index |
℃ | UL 746 | |
电气性能 Electrical performance |
℃ | UL 746 | |
冲击机械性能 Impact mechanical performance |
℃ | UL 746 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
耐电弧性 Arc resistance |
sec | ASTM D495 | |
相比漏电起痕指数 Compared to the leakage tracing index |
V | ASTM D2303 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
1.50 mm 1.50 mm |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 XY Direction |
3 Z Direction |
【新闻资讯】查看全部
WINTEC将在CHINAPLAS 2016首发全电动e-win系列
2016-04-13 作为奥地利ENGEL集团的子公司,WINTEC 在中国常州专为满足亚洲常规市场的需要,制造具有高性价比的注塑机,WINTEC注塑机注重生产效率、质量和能源效率。在CHINAPLAS国际橡塑展期间,WINTEC将首发新款全电动e-win系列注塑机以及t-win 大型注塑机。 全电动e-win让用户赢在起跑线 全电动e-win系列注塑机所有动作均由伺服电机驱动,高精度动作确保生产过程稳定和利益最大化。此外,e-win系列注塑机还 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |