牌号简介 About |
---|
具有玻璃纤维含量为20%的醚基注塑型特点:非常高的刚度、极强的冲击强度和低温下的流动性、非常好的水解和微生物抗性、耐海水、良好的抗紫外线、高抗冲击性和高流动性、良好的吸音性、优异的着色性和Pri。适用性应用:技术应用的机械高应力部件(室内和室外)、滑雪、骑马和汽车运动保护装置、渔网坠、头盔、滑雪尖端等冬季运动产品、滑雪边缘保护部件、滑雪捆绑装置、滑雪靴、护目镜、近海区域的外壳 Ether Based Injection Moulding Type with a Glass Fibre Content of 20 % Characteristics: very high stiffness, extreme impact strength and fl exibility at low temperature, very good hydrolysis and microbial resistance, seawater proof, good UV resistance, high shock resistance & high fl exibility, good noise absorption, excellent colorability and printability Applications: mechanically highly stressed components of technical applications (indoor and outdoor), protectors for skiing, horse riding and motor sports, fi shing net sinker, helmets, winter sport products such as ski tips, ski edge protection parts, ski bindings, ski boots, goggles, housings in the offshore area |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.31 | g/cm³ | ISO 1183/A |
收缩率 Shrinkage rate |
|||
TD TD |
0.58 | % | |
MD MD |
0.20 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179/1eA | ||
-30℃ -30℃ |
> 8.5 | kJ/m² | |
23℃ 23℃ |
> 18 | kJ/m² | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
ISO 179/1eU | ||
-30℃ -30℃ |
kJ/m² | ||
23℃ 23℃ |
kJ/m² | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
|||
B50 B50 |
℃ | ISO 306 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
DIN 53752-A | ||
MD MD |
1/℃ | ||
TD TD |
1/℃ | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 868 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 527-2/200 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2/200 | |
弯曲模量 Bending modulus 1 |
ISO 178 | ||
-30℃ -30℃ |
MPa | ||
23℃ 23℃ |
MPa | ||
弯曲强度 bending strength 2 |
ISO 178 | ||
-30℃ -30℃ |
MPa | ||
23℃ 23℃ |
MPa | ||
Abrasion Abrasion |
mm³ | ISO 4649 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 0.039 in/min |
3 0.079 in/min |
【新闻资讯】查看全部
广州石化化工裂解装置高附能耗创新低
2016-03-24 2月份,广州石化化工一部裂解装置高附能耗为315.08千克标油/吨,跟2015年平均高附能耗相比降幅达16.56%,创历史新低。 为降低装置能耗,提升装置运行水平,化工一部利用去年年底的大修时机,对裂解气压缩机和丙烯机两台透平改造,进行效率提升。透平汽封由原有梳齿密封更改为刷式密封,同时对透平转子及隔板进行更新,减少蒸汽的消耗及级间泄漏,提高压缩机效率,达到节能降耗目的。改造后裂解气透平真空度由原来的62千帕上升到84千帕,每小时减少凝液约5吨。丙烯机透平真空度由原来的56 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |