公司信息及水印
牌号简介 About |
---|
Alathon M 4612是一种具有优异的抗应力开裂和低温冲击强度的共聚物。典型应用包括食品容器、座椅铰链、管头和需要高ESCR的零件。 Alathon M4612 is a copolymer that provides outstanding stress crack resistance and low temperature impact strength. Typical applications include food containers, seat hinges, tube headers and parts requiring high ESCR. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.946 | g/cm³ | ASTM D1505 |
表观密度 Apparent density |
0.59 to 0.63 | g/cm³ | ASTM D1895 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
1.2 | g/10min | ASTM D1238 |
螺旋流动长度 Spiral flow length 2 , 3 |
19.6 | cm | Internal Method |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
ASTM D1693 | ||
10%非离子洗涤剂 10% non-ionic detergent |
33.6 | hr | ASTM D1693 |
100%非离子洗涤剂 100% non-ionic detergent |
hr | ASTM D1693 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus 4 |
ASTM D638 | ||
-- -- |
MPa | ASTM D638 | |
1% 正割 1% secant |
MPa | ASTM D638 | |
拉伸强度 tensile strength 6 |
|||
断裂 fracture 5 |
MPa | ASTM D638 | |
屈服 yield 6 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 5 |
|||
断裂 fracture 5 |
% | ASTM D638 | |
屈服 yield 5 |
% | ASTM D638 | |
弯曲模量 Bending modulus 6 |
ASTM D790 | ||
-- -- |
MPa | ASTM D790 | |
1% 正割 1% secant |
MPa | ASTM D790 | |
2% 正割 2% secant |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
-18℃ -18℃ |
ASTM D4812 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 | |
熔融峰值温度 Melting peak temperature |
℃ | ASTM D3418 | |
结晶峰温度 Crystallization peak temperature 12 |
|||
DSC DSC 12 |
℃ | ASTM D3418 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 熔体温度: 440°F, 注塑压力: 1.00E+3 psi |
3 0.0625 in |
4 类型 1, 2.0 in/min |
5 类型 4, 2.0 in/min |
6 0.49 in/min |
【新闻资讯】查看全部
如何选择适宜的三坐标测量机
2016-09-19 随着机械制造业的不断发展,对产品精度的要求越来越高,三坐标测量机逐渐成为不可或缺的检测仪器。目前,市面上三坐标测量机的种类繁多,不断出现精度高、性能好、使用方便、易于操作、又可满足用户一些特殊检测任务的测量机。尤其是软件开发越来越快,测量机自动化程度越来越高。面对如此庞杂的系统时,如何选择合适的三坐标测量机以满足检测要求,又能达到最佳的性价比,并产生较高的经济效益,成为众多企业关心的问题之一。本文针对这个问题,为大家阐述如何选择合适的三坐标测量机。希望能对大家有所帮助。 一 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |