牌号简介 About |
---|
PPH35是一种通用的聚丙烯均聚物。典型应用包括一次性饮用水和薄壁包装。Osterlene® PPH35符合食品药品监督管理局21 CFR第177.1520节的要求。本法规允许在“…与食品接触的物品或成分中使用该烯烃聚合物。”具体限制可能适用。有关更多信息,请联系您的Osterman销售代表。 PPH35 is a general purpose polypropylene homopolymer. Typical applications include disposable drinkware and thin-walled packaging. Osterlene PPH35 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
35 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
27 | J/m | ASTM D256 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
104 | ASTM D785 | |
拉伸强度 tensile strength |
|||
屈服 yield |
35.9 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
屈服 yield |
11 | % | ASTM D638 |
弯曲模量 Bending modulus |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
ILLIG推出最新热成型膜内贴标技术
2016-11-03 在K 2016上,热成型系统制造商ILLIG公司首次展示其最新开发成果IML-T生产线IC-RDM 70K,以及小型模内贴标装置RDML 70b。其中,小型模内贴标装置RDML 70b可以灵活装饰几乎所有杯型。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |