牌号简介 About |
---|
TP-4020是一种硬聚氨酯,适用于室温手工配料系统或真空铸造系统。在不使用汞、MOCA或TDI的情况下,可以获得优良的物理性能。 TP-4020 is a stiff polyurethane formulated for room temperature hand-batch systems or vacuum casting systems. Excellent physical properties can be obtained without the utilization of mercury, MOCA, or TDI. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
Hardener Hardener |
1.24 | g/cm³ | |
固化处理 Curing treatment |
1.30 | g/cm³ | |
基体树脂 Matrix resin |
1.40 | g/cm³ | |
收缩率 Shrinkage rate |
|||
MD MD |
0.10 到 0.50 | % | ASTM D2566 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弯曲模量 Bending modulus |
2760 | MPa | ASTM D790 |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
粘度 viscosity |
|||
38℃ 38℃ 2 |
Pa·s | ||
38℃ 38℃ 3 |
Pa·s | ||
38℃ 38℃ 4 |
Pa·s | ||
固化时间 Curing time 5 |
hr | ||
胶凝时间 Gelation time |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
脱模时间 stripping time |
|||
66℃ 66℃ |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Hardener |
3 Mixed |
4 Resin |
5 1 hour at 150°F + 24 hours at 77°F |
【新闻资讯】查看全部
2030年全球低碳氢产能将达到1400万吨/年
2021-08-13 搜料网资讯: 据世界能源8月10日消息:全球领先的数据分析公司GlobalData表示,全球可再生能源或天然气的碳捕集制氢能力将增加20倍以上,达到1400万吨/年。 GlobalData的最新报告《氢转型 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |