牌号简介 About |
---|
FRAGOM是我们的阻燃无卤聚烯烃热塑性化合物的商标。FRAGOM PR/800是一种柔性阻燃聚烯烃热塑性化合物,具有高温指数和良好的氧指数,适用于电缆护套和绝缘。 FRAGOM is the trade-mark of our flame retardant halogen free polyolefin thermoplastic compounds. FRAGOM PR/800 is a flexible flame retardant polyolefin thermoplastic compound having high temperature index and good oxygen index, suitable for cable sheathing and insulation. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.51 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,21.6kg 190℃,21.6kg |
20 | g/10min | ASTM D1238 |
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
空气中拉伸强度的变化率 The rate of change in tensile strength in air |
|||
110℃,168 hr 110℃,168 hr |
0.0 | % | IEC 60811 |
在空气中断裂时拉伸应力变化 Changes in tensile stress during fracture in air |
|||
拉伸强度的变化率 The rate of change in tensile strength |
|||
70℃,4 hr,在SAE 20油中 70 ℃, 4 hours, in SAE 20 oil |
-23 | % | IEC 60811 |
断裂时拉伸应力变化 Changes in tensile stress during fracture |
|||
70℃,4 hr,在SAE 20油中 70 ℃, 4 hours, in SAE 20 oil |
0.0 | % | IEC 60811 |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
极限氧指数 Extreme oxygen index |
% | ASTM D2863 | |
Halogen Content Halogen Content |
% | IEC 60754-1 | |
烟气中的腐蚀性气体 Corrosive gases in flue gas |
|||
oH oH |
IEC 60754-2 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | IEC 60811 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | IEC 60811 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
橡胶、胶凝剂等化工行业将严控VOCs排放量
2016-09-20 自“大气十条”出炉后,中国相关配套政策进入密集出台期。 在日前举办的“大气污染防治研讨会”上,中国化工环保协会会长周献慧表示,在工信部、财政部联合发布《重点行业挥发性有机物削减计划》后,相关机构正在编制涂料、胶凝剂、橡胶等行业的VOCs控制方案,制定行业削减路线图以推进VOCs治理。 此外,相关部门也在开展重点行业 VOCs测算,加强化工行业大气污染物排放标准研究。 周献慧表示,化工行业大气污染治理尚处于起步阶段,应争取加快非电行业的经济激励 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |