牌号简介 About |
---|
Sindustris PBT SG5501是一种聚对苯二甲酸丁二酯 + PET (PBT+PET)材料,含有的填充物为50% 玻璃纤维增强材料。 该产品在亚太地区有供货,加工方式为:注射成型。 Sindustris PBT SG5501的主要特性有: 美观 高刚度 典型应用领域包括: 电气/电子应用 汽车行业 Sindustris PBT SG5501 is a Polybutylene Terephthalate + PET (PBT+PET) material filled with 50% glass fiber. It is available in Asia Pacific for injection molding. Important attributes of Sindustris PBT SG5501 are: Good Aesthetics High Stiffness Typical applications include: Electrical/Electronic Applications Automotive |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.72 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD:3.2 mm MD:3.2 mm |
0.30 到 0.90 | % | ASTM D955 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
断裂,3.20 mm Fracture, 3.20 mm 2 |
157 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
断裂,3.20 mm Fracture, 3.20 mm 2 |
2.0 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
|||
3.20 mm 3.20 mm 3 |
13700 | MPa | ASTM D790 |
弯曲强度 bending strength 3 |
|||
3.20 mm 3.20 mm 3 |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,3.2mm 23℃,3.2mm |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火,6.4 mm 0.45 MPa, unannealed, 6.4 mm |
℃ | ASTM D648 | |
熔融峰值温度 Melting peak temperature |
℃ | ASTM D3418 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 0.20 in/min |
3 0.051 in/min |
【新闻资讯】查看全部
如何处理脱模困难的成绩
2016-08-05 首先来分析下为什么会出现脱模困难的问题,大概有3点,1 模具内由凹槽;2 脱模斜度不足;3 模具光洁度不高。 二. 相关联的知识 1 由于脱模斜度不足而造成的故障非常常见,在进行制品设计时,必须在图面上标明脱模斜度,脱模斜度通常范围在1~2度之间,在这一范围内以尽量大为好,特殊的场合也允许为0.5度以上 2 射出压力如果太高,制品同模具太密切贴紧,脱模就变得困难 3 为了顺利使制品脱离模具,通才使用含有硅油的脱模剂,然而使用脱 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |