牌号简介 About |
---|
这种无规共聚物具有高分子量,具有高要求压力管道所需的特殊设计性能。它具有很高的热稳定性,特别适用于抗萃取。该等级使用寿命长,用于制造饮用水输送用的冷热水管道和配件。该等级符合EN ISO 15874、ISO 3213、DIN 8078和DIN 8077的要求。它还符合德国关于与人类用水接触的材料的规定(BGA要求和KTW建议)。本文所述产品尤其未经测试,因此未经验证可用于医药/医疗应用。 This random copolymer has a high molecular weight with special designed properties required for high demanding pressure pipes. It is highly heat stabilised and especially formulated for extraction resistance. This grade with long service life is used for the manufacturing of cold and hot water pipes and fittings for transport of drinking water. This grade fulfills the requirements in EN ISO 15874, ISO 3213, DIN 8078 and DIN 8077. It also complies with German regulations for materials in contact with water intended for human consumption (BGA requirements and KTW recommendations). The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.898 | g/cm³ | ASTM D792, ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
0.30 | g/10min | ASTM D1238,ISO 1133 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
25 | kJ/m² | ISO 179/1eA |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
无断裂 | ISO 179 | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
-20℃ -20℃ |
20 | J/m | ASTM D256-A |
0℃ 0℃ |
J/m | ASTM D256-A | |
23℃ 23℃ |
J/m | ASTM D256-A | |
-20℃ -20℃ |
kJ/m² | ISO 180-1A | |
0℃ 0℃ |
kJ/m² | ISO 180-1A | |
23℃ 23℃ |
kJ/m² | ISO 180-1A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
|||
-- -- |
℃ | ASTM D1525,ISO 306/A120 4 4 | |
B120 B120 |
℃ | ASTM D1525, ISO 306/B120 5 5 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 868 | ||
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
|||
1% 正割 1% secant 1 |
MPa | ASTM D638 | |
-- -- |
MPa | ISO 527-2/1A/1 | |
拉伸强度 tensile strength |
|||
屈服 yield 2 |
MPa | ASTM D638 | |
屈服 yield |
MPa | ISO 527-2/1A/50 | |
拉伸应变 Tensile strain |
|||
屈服 yield 3 |
% | ASTM D638 | |
屈服 yield |
% | ISO 527-2/1A/50 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
阿国油出售第三船蓝氨产品
2021-09-04 搜料网资讯: 近日,阿布扎比国家石油公司(ADNOC)宣布,该公司已向一日本公司出售了第三船蓝氨产品。据悉,ADNOC与Fertiglobe合作,将此船蓝氨货物出售给Inpex公司用于发电。ADNOC表示, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |