公司信息及水印
牌号简介 About |
---|
Plexiglas® DRG-100是一种冲击改性热塑性丙烯酸树脂,用于注塑和挤出应用。该等级适用于批准的医疗应用,与DR-100G相比具有更好的抗伽马性能。它是一种耐热树脂,边缘颜色最小,抗冲击性能是标准丙烯酸树脂的10倍。它是一种全丙烯酸树脂,结合了与其他冲击塑料相关的韧性,以及传统丙烯酸材料的出色透明度和抗紫外线性能。Moldflow模拟数据可用。 Plexiglas® DRG-100 is an impact modified thermoplastic acrylic resin formulated for injection molding and extrusion applications. This grade is formulated for approved medical applications and has improved gamma resistance compared to DR-100G. It is a heat resistant resin with minimal edge color and provides 10 times the impact resistance of standard acrylics. It is an all-acrylic resin that combines the toughness associated with other impact plastics and the outstanding transparency and UV resistance of conventional acrylic materials. Moldflow simulation data is available. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.15 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,3.80kg 230℃,3.80kg |
3.2 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD MD |
0.30 to 0.80 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.40 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
59 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature 2 |
|||
1.8 MPa,退火 1.8 MPa, annealed 2 |
℃ | ASTM D648 | |
0.45 MPa,退火 0.45 MPa, annealed 2 |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
|||
-- -- |
℃ | ASTM D1525 3 | |
-- -- |
℃ | ASTM D1525 4 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM C177 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
折射率 Refractive index 5 |
ASTM D542 | ||
透光率 Transmittance |
|||
3180 µm 3180 µm |
% | ASTM D1003 | |
雾度 Haze |
|||
3180 µm 3180 µm |
% | ASTM D1003 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
ASTM Classification ASTM Classification |
ASTM D788 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
屈服 yield |
MPa | ASTM D790 | |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
ASTM D785 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Annealing cycle: 4hrs @ 176°F |
3 速率 A (50°C/h), 压 力1 (10N) |
4 速率 A (50°C/h), 载荷2 (50N) |
5 ND @ 72°F |
【新闻资讯】查看全部
EIA称CFC-11仍在中国的一些聚氨酯硬泡体系中被运用
2018-07-12 据一家非政府组织称,含有CFC-11的聚氨酯配方正在中国被非法广泛供应。 EIA(环境调查协会),一个位于伦敦的民间组织,在今年6月,联系了在互联网或商业网站上宣传聚氨酯硬质聚氨酯泡沫塑料系统的中国公司后,提出了上述指控。 EIA称其联系了25家工厂或泡沫生产公司,其中21家回复。在那21家里,分布于10个省份的18家公司承认其在泡沫绝缘领域使用CFC-11,主要用于建筑嵌板和喷涂泡沫。 在看到一篇叙述东亚地区大气中氟里昂-11浓度越来越高的 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |