![](/page/pc/images/result/downloads-img2.png)
公司信息及水印
![](/page/pc/images/result/downloads-img4.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img3.png)
牌号简介 About |
---|
警告:此材料的状态为“商业:限量发行”。此材料的数据最近尚未验证。在指定此等级之前,请联系RTP公司以获取当前信息。 Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.21 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD:3.2 mm,注塑成型 MD: 3.2 mm, injection molded |
1.0 到 1.5 | % | ASTM D955 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
注塑成型 injection molding |
2760 | MPa | ASTM D638 |
拉伸强度 tensile strength |
52.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
10 | % | ASTM D638 |
弯曲模量 Bending modulus |
|||
注塑成型 injection molding |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
注塑成型 injection molding |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
3.2mm,注塑成型 3.2mm, injection molded |
J/m | ASTM D256 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
3.2 mm 3.2 mm |
J/m | ASTM D4812 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部 ![]()
巨化股份10kt/aPVDF项目一期达到预定可使用状态 二期A段处于试生产阶段
2021-05-30 搜料网资讯: 5月24日,巨化股份在互动平台回答投资者提问时表示, PVDF 目前需求和前景良好,产品价格有所上涨。公司10kt/a PVDF 项目主要包括一期 乳液 聚合 2.5kt/aPVDF 规模,配套 VD |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |