牌号简介 About |
---|
Lytex 4149是一种高性能的3K二次碳纤维(PAN)增强环氧树脂片材成型化合物,设计用于军事和航空航天结构应用,需要优良的机械性能、高温下保持性能、良好的耐化学性和低密度。 Lytex 4149 is a high-performance, 3K tow carbon fiber (PAN) reinforced epoxy sheet molding compound designed for military and aerospace structural applications requiring excellent mechanical properties, retention of properties at elevated temperatures, good chemical resistance, and low density. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.45 | g/cm³ | ASTM D792 |
表观密度 Apparent density |
1.45 | g/cm³ | ASTM D1895 |
收缩率 Shrinkage rate |
|||
MD MD |
0.0 | % | ASTM D955 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
55200 | MPa | ASTM D638 |
拉伸强度 tensile strength |
290 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩模量 Compression modulus |
MPa | ASTM D695 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
剪切模量 shear modulus |
MPa | ASTM D732 | |
剪切强度 shear strength |
MPa | ASTM D732 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
连续使用温度 Continuous use temperature |
℃ | ASTM D794 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM C177 | |
贮藏期限 Storage period |
|||
-12℃ -12℃ |
wk | ||
脱模时间 stripping time |
|||
138℃ 138℃ |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
H.B. Fuller收购全球粘合剂公司Wisdom工业胶业务
2017-03-01 H.B. Fuller公司日前收购了Wisdom全球粘合剂公司(Wisdom Worldwide Adhesives)的工业粘合剂业务,后者是为包装、纸加工和装配市场提供粘合剂的供应商。 Wisdom公司 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |