牌号简介 About |
---|
Alathon® L5332CP是一种高密度聚乙烯树脂,通常被客户用于波纹管、导管和型材挤压应用。本产品符合AASHTO M294的抗应力开裂要求。它具有良好的加工稳定性和高抗压性。L5332CP符合ASTM D 3350电池分类435500A。 Alathon L5332CP is bimodal molecular weight distribution, fractional melt index HDPE resin that exhibits an exceptional balance of environmental stress crack resistance and stiffness. Typical applications include blow molded containers for packaging household and agricultural chemicals, particularly those that are strong stress crack-inducing reagents. Alathon L5332CP is a high density polyethylene resin typically used by customers for corrugated pipe, conduit and profile extrusion applications. This product meets the stress crack resistance requirement of AASHTO M294. It exhibits excellent processing stability and high crush resistance. L5332CP conforms to ASTM D 3350 cell classification 435500A. Alathon L5332CP exhibits an excellent balance of stiffness and environmental stress crack resistance. Typical end uses include thick sheet for architectural applications and for assembly into industrial parts. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.953 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
0.32 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
66 | ASTM D2240 | |
拉伸强度 tensile strength |
|||
屈服 yield |
27.6 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
> 800 | % | ASTM D638 |
屈服 yield |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
2% 正割 2% secant |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Tensile Impact Tensile Impact |
J/cm | ASTM D1822 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
氧感应时间 Oxygen sensing time |
|||
200℃ 200℃ |
min | ASTM D3895 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
DSC Induction Temperature DSC Induction Temperature |
℃ | ASTM D3350 | |
NCLS NCLS |
hr | ASTM F2136 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
天然再生材料注塑实现“绿色品质”
2022-05-19 位于奥地利Gleisdorf的ANA-U公司以绿色品质为品牌,采用完全可再生材料混合而成的天然材料生产模制品,这些制品皆由威猛集团(WITTMANN Group)的一条全电动注射成型生产线生产而成。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |