牌号简介 About |
---|
聚甲醛是一种高性能的缩醛共聚物,具有优异的机械、电气和磨损性能。即使加工具有复杂几何形状的零件,它的设计也能提供卓越的尺寸稳定性。Pomalux是许多轴承和磨损应用的最佳选择,因为它具有低摩擦系数,在潮湿和干燥环境中都能很好地磨损。由于其固有的尺寸稳定性和良好的磨损性能,广泛应用于装配工装夹具中。当需要低吸湿性和高介电强度时,Pomalux通常用于电气应用。天然(白色)和黑色Pomalux都符合FDA标准,可用于食品加工机械。Westlake Plastics Company根据ASTM D6100制造所有缩醛挤压和压缩成型片材、板材和杆材。本规范涵盖了挤压和压缩成型板材、板材和杆的材料、尺寸、工艺和性能的要求和试验方法。应用范围包括:钻模和夹具泵和阀门零件衬套轴承齿轮耐磨垫电气元件POMALUX的优点:高强度和刚度低摩擦易于加工尺寸稳定性好低吸湿性在潮湿和干燥环境下耐磨损性好耐化学性好电气性能好符合FDA的特性 Pomalux is a high-performance acetal copolymer that has excellent mechanical, electrical, and wear properties. It is engineered to provide outstanding dimensional stability, even when machining parts with complex geometries. Pomalux is an excellent choice for many bearing and wear applications since it has low coefficient of friction and wears well in both wet and dry environments. It is widely used for assembly jigs and fixtures because of its inherent dimensional stability and excellent wear properties. Pomalux is often specified for electrical applications when low moisture absorption and high dielectric strength are required. Both natural (white) and black Pomalux are FDA compliant for use in food processing machinery. Westlake Plastics Company manufactures all Acetal extruded & compression molded sheets, plates and rods in accordance to ASTM D6100. This specification covers requirement and test methods for the material, dimensions, workmanship and the properties of extruded and compression molded sheets, plates and rods. Applications Include: Jigs and fixtures Pump and valve parts Bushings Bearings Gears Wear pads Electrical components Advantages of Pomalux: High strength and stiffness Low friction Easy to machine Good dimensional stability Low moisture absorption Resists abrasive wear in both wet and dry environments Good chemical resistance Excellent electrical properties FDA compliant |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.41 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.22 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-40℃ -40℃ |
64 | J/m | ASTM D256 |
23℃ 23℃ |
80 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
157 | ℃ | ASTM D648 |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM C177 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
1.50 mm 1.50 mm |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
ASTM D638 | ||
屈服,-40℃ Yield, -40 ℃ |
MPa | ASTM D638 | |
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
ASTM D638 | ||
断裂,-40℃ Fracture, -40 ℃ |
% | ASTM D638 | |
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
压缩强度 compressive strength |
|||
10% 应变 10% strain |
MPa | ASTM D695 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
上半年中国出口塑料制品1146亿元 同比增长4.5%
2016-07-15 据海关总署最新统计,今年上半年,中国货物贸易进出口总值11.13万亿元人民币,比去年同期(下同)下降3.3%。其中,出口6.4万亿元,下降2.1%;进口4.73万亿元,下降4.7%;贸易顺差1.67万亿元,扩大5.9%。 6月份当月,中国进出口总值2.04万亿元人民币,下降0.3%。其中,出口1.17万亿元,增长1.3%;进口8633亿元,下降2.3%;贸易顺差3112亿元,扩大12.8%。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |