牌号简介 About |
---|
Ryton R-7-121NA和R-7-121BL玻璃纤维和矿物填充聚苯硫醚化合物使用常规成型设备提供良好的机械强度、良好的流动性和低维护性成型。 Ryton® R-7-121NA and R-7-121BL glass fiber and mineral filled polyphenylene sulfide compounds provide good mechanical strength with good flow and low maintenance molding using conventional molding equipment. |
技术参数 Technical Data | |||
---|---|---|---|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
265 | ℃ | ASTM D648 |
导热系数 Thermal conductivity coefficient |
0.58 | W/m/K | JIS R2618 |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1.5E-5 | 1/℃ | ASTM D696 |
TD TD |
3.0E-5 | 1/℃ | ASTM D696 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻 Volumetric resistance |
1.0E+15 | Ω.cm | ASTM D257 |
表面电阻 Surface resistance |
Ω.cm | ASTM D257 | |
绝缘强度 Insulation strength |
|||
|
KV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
23℃ 23℃ |
1 kHz | ASTM D150 | |
23℃ 23℃ |
1 MHz | ASTM D150 | |
耗散因数 Dissipation factor |
|||
23℃ 23℃ |
1 kHz | ASTM D150 | |
23℃ 23℃ |
1 MHz | ASTM D150 | |
耐电弧性 Arc resistance |
sec | ASTM D495 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
|
V-0 | UL 94 | |
1.50mm 1.50mm |
UL 94 | ||
3.00mm 3.00mm |
UL 94 | ||
6.00mm 6.00mm |
UL 94 | ||
灼热丝起燃温度 Igniting temperature of the hot wire |
|||
0.75 mm 0.75 mm |
℃ | IEC 60695-2-12 | |
6 mm 6 mm |
℃ | IEC 60695-2-12 | |
0.75 mm 0.75 mm |
℃ | IEC 60695-2-12 | |
6 mm 6 mm |
℃ | IEC 60695-2-12 | |
灼热丝相对温度 Relative temperature of heating wire |
|||
0.75mm 0.75mm |
℃ | IEC 60695-2-13 | |
6.00mm 6.00mm |
℃ | IEC 60695-2-13 | |
0.75mm 0.75mm |
℃ | IEC 60695-2-13 | |
6.00mm 6.00mm |
℃ | IEC 60695-2-13 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
M 级 | ASTM D785 | |
洛氏硬度 Rockwell hardness |
R 级 | ASTM D785 | |
拉伸强度 tensile strength |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃ 23℃ |
J/m | ASTM D256 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 95%RH, 48 hr |
【新闻资讯】查看全部 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |