牌号简介 About |
---|
一种吹塑级高密度聚乙烯应用:食品包装液体食品容器(牛奶、水和果汁)热成型零件特点:优良的阻隔性能优良的加工均匀性生产具有优良外观和硬度的瓶子,使气味和味道达到FDA认可的最低。 Premi-Ject® 6100-15 is a fiberglass reinforced thermoset bulk molding compound for electrical and flame retardant applications. Good dimensional stability, including excellent thermal resistance. Pigmentable for molded-in color; best appearance with mold texture. Excellent property retention in cold and hot environments. Recognized by Underwriters Laboratories, File # E42524. Underwriters Laboratories 94-VO flame resistance at 1.5mm thickness. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.70 to 1.85 | g/cm³ | |
收缩率 Shrinkage rate |
|||
MD MD |
0.15 to 0.35 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
模压成型 Compression Molding |
12400 | MPa | ASTM D638 |
拉伸强度 tensile strength |
|||
模压成型 Compression Molding |
34.5 | MPa | ASTM D638 |
弯曲模量 Bending modulus |
|||
模压成型 Compression Molding |
10300 | MPa | ASTM D790 |
弯曲强度 bending strength |
|||
模压成型 Compression Molding |
MPa | ASTM D790 | |
泊松比 Poisson's ratio |
|||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
模压成型 Compression Molding |
J/m | ASTM D256 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
模压成型 Compression Molding |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion 2 |
|||
TD TD 3 |
1/℃ | ||
MD MD 2 |
1/℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ||
相对温度指数 Relative temperature index |
|||
电气性能 Electrical performance |
℃ | UL 746 | |
强度机械性能 Strength mechanical performance |
℃ | UL 746 | |
冲击机械性能 Impact mechanical performance |
℃ | UL 746 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
耐电弧性 Arc resistance |
sec | ASTM D495 | |
相比漏电起痕指数 Compared to the leakage tracing index |
V | ASTM D2303 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
1.50 mm 1.50 mm |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
2017年废塑料出口数据总结剖析
2018-02-11 2017年废塑料进口批文仅公示11批,总体数据如何,是行业内众多人士关注的问题,以下为2017年废塑料进口数据综合分析。 1.进口量仅582.91万吨规模倒退到2006年 2013年是废塑料进口市场的 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |