牌号简介 About |
---|
SABIC® PPcompound 8500是一种弹性体改性矿物填充聚丙烯,适用于汽车喷涂的外部应用。它的低密度和良好的刚度冲击平衡使它适合于减轻重量的设计。典型应用包括汽车外部零件,如具有复杂和大形状的零间隙汽车保险杠应用。SABIC® PPcompound 8500是指定的汽车等级。 SABIC® PPcompound 8500 is an elastomer-modified mineral filled Polypropylene for automotive painted exterior applications. Its low density and excellent stiffness impact balance makes it suited for weight reduction designs. Typical applications include automotive exterior parts such as zero gap automotive bumper applications with complex and large shapes. SABIC® PPcompound 8500 is a designated automotive grade. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.00 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
9.0 | g/10min | ISO 1133 |
收缩率 Shrinkage rate |
|||
24 hrs 24 hrs |
0.90 | % | 内部方法 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃,注塑成型 23 ℃, injection molding |
无断裂 | ISO 179/1eA | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180/4A | ||
-20℃,注塑成型 -20 ℃, injection molding |
10 | kJ/m² | ISO 180-4A |
0℃,注塑成型 0 ℃, injection molding |
ISO 180/4A | ||
23℃,注塑成型 23 ℃, injection molding |
ISO 180/4A | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/A | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
ASTM D696 | ||
-30 到 30℃ -30 to 30 ℃ |
cm/cm/℃ | ASTM D696 | |
23 到 80℃ 23 to 80 ℃ |
cm/cm/℃ | ASTM D696 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,注塑成型 Shaw's D, injection molding |
ISO 868 | ||
拉伸强度 tensile strength |
ISO 527-2/1A/50 | ||
屈服,注塑成型 Yield, injection molding |
MPa | ISO 527-2/1A/50 | |
断裂,注塑成型 Fracture, injection molding |
MPa | ISO 527-2/1A/50 | |
拉伸应变 Tensile strain |
|||
断裂,注塑成型 Fracture, injection molding |
% | ISO 527-2/1A/50 | |
弯曲模量 Bending modulus 2 |
|||
注塑成型 injection molding 2 |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 方法 I (三点负荷) |
【新闻资讯】查看全部
总投资180亿,新凤鸣新沂产业基地开工
2021-05-25 搜料网资讯: 2021年5月22日上午,在一片热烈的掌声、飘逸的彩带中,新凤鸣新沂产业基地开工仪式顺利举行,现场机械鸣笛,吹响施工号角,打桩机打下第一根桩基,代表着新凤鸣迈出 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |