牌号简介 About |
---|
说明复合PP具有较高的抗冲击强度,对汽车外部零件具有良好的成型性能。它具有无漆型和耐刮性的特点,特别适用于汽车外门槛成型件。此外,通过对高等规聚丙烯、橡胶和无机填料的优化,既满足了高弯曲模量,又满足了高冲击强度的要求。这一等级的产品具有良好的加工性能,因此我们的客户具有更高的生产效率。说明:为汽车侧栏造型外部部件设计的复合PP,具有以下特点:卓越的抗冲击性和抗划伤性、优良的加工性;卓越的外观应用、外部侧栏造型保持了最佳的冲击平衡和模量、卓越的耐刮性;在模具中具有卓越的流动性。 Description Compound PP shows high impact strength & excellent molding property for automobile exterior parts. It features non-painted type and anti-scratch resistance characteristic ability, especially for automobile exterior side sill molding part. In addition, it is satisfied with high flexural modulus and high impact strength at the same time with optimization of high isotactic PP, rubber and inorganic filler. And this grade exhibit excellent processability so our customers have a higher productivity. Description Compound PP designed for automobile exterior part of side sill molding with following: Superior impact-resistance and anti-scratch resistance Excellent processability; Superior appearance Applications Exterior side sill molding Maintains optimum balance of impact and modulus Superior scratch-resistance; Superior flow in a mold |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.09 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
23 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
1.86 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
250 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
1950 | MPa | ASTM D790 |
弯曲强度 bending strength 3 |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-30℃ -30℃ |
J/m | ASTM D256 | |
23℃ 23℃ |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 |
备注 |
---|
2 50 mm/min |
3 10 mm/min |
【新闻资讯】查看全部
巴斯夫将在湛江建设一座工程塑料复合工厂和一座TPU工厂
2020-09-12 搜料网资讯: 巴斯夫计划在该公司位于中国湛江的综合化工生产基地建设一座工程塑料复合工厂和一座TPU工厂。这将是第一批投产的生产工厂。 到2022年,新的工程塑料复合工厂将为中 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |