物性表自定义
公司信息及水印
公司信息及水印
下载中文物性表
下载英文物性表
邮件发送/他人
| 牌号简介 About |
|---|
| 我们的TPU“Mirakutoran”具有以下突出特点。具有优异的耐磨抗张强度、较高的机械强度和撕裂强度，是一种硬度范围广、耐冲击强度高、耐油、耐化学性好、低温性能优异、耐候性好、耐臭氧性好、弹性好、振动消声效果好等优点的橡胶。聚氨酯弹性体热塑性塑料，即重放性较强的可加工硫化工艺，无需固化反应，极高产率树脂等易溶解的聚合物，在溶剂法中易溶解，米拉库托兰的标准型有E型和P型两种。E型分子具有一定的交联结构，具有优良的机械强度和压缩永久变形能力。P型具有良好的流动性线性结构。 Our TPU "Mirakutoran ®" has the following outstanding features. Has excellent wear resistance Tensile strength, high mechanical strength and tear strength Is a wide range of hardness High impact strength Oil resistance and good chemical resistance Excellent low temperature properties, weather resistance, ozone resistance and is also good Flexible rubber elastic, vibration-effective silencing Compared to other urethane elastomer thermoplastic that is more Playback can be processed Vulcanization process without curing reaction, very high productivity Resins and other polymer is easy Solution is easily dissolved in solvent process Mirakutoran to the standard type E and P are two types. Type E has a certain cross-linked structure in the molecule, and excellent mechanical strength and compression set. P type is characterized by good liquidity linear structure |
产品描述 Product Description
性能特点： 耐磨; 耐化学性; 耐候抗UV; 机械强度好; 机械强度好-撕裂; 尺寸稳定性好; 耐油; 耐高温; 耐低温; 耐臭氧; 减震; 冲击性能好; 韧性好; High impact resistance,Ozone resistance,Good wear resistance,Good Rigidity,Antifreeze,Good tear strength,Solvent resistance,Good Dimensional Stability,High Heat Resistance,Good flexibility,noise reduction,Grease resistance,Weather resistance is good
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
1.14 | g/cm³ | ASTM D792 |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
邵氏硬度 Shore hardness |
|||
|
邵氏 A，23℃，2.00 mm，注塑成型 Shore A, 23 ℃, 2.00 mm, injection molding |
63 到 67 | ASTM D2240 | |
|
弹性体 Elastomer |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
拉伸强度 tensile strength 2 |
注册或登录后
所有资料免费
|
||
|
屈服，23℃，2 mm Yield, 23 ℃, 2 mm 2 |
注册或登录后
所有资料免费
|
MPa | ASTM D412 |
|
100% 应变，23℃，2 mm 100% strain, 23 ℃, 2 mm 2 |
注册或登录后
所有资料免费
|
MPa | ASTM D412 |
|
拉伸应变 Tensile strain 2 |
注册或登录后
所有资料免费
|
||
|
断裂，23℃，2 mm Fracture, 23 ℃, 2 mm 2 |
注册或登录后
所有资料免费
|
% | ASTM D412 |
|
撕裂强度 tear strength 2 |
注册或登录后
所有资料免费
|
||
|
23℃，2.00 mm 23℃，2.00 mm 2 |
注册或登录后
所有资料免费
|
kN/m | ASTM D624 |
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
| 2 12 in/min |
当前牌号已加入对比
支付宝
微信支付