牌号简介 About |
---|
标准聚酰胺6应用一般用途,注射成型和挤压/成型应用。特性表现出良好的熔体流动特性,可填充薄片并缩短循环时间。它具有良好的机械性能、强度、刚度和韧性,以及优异的耐热性、化学性和耐磨性。 Standard Polyamide 6 Applications General purpose, Injection Molding and Extrusion/Molding applications. Characteristics Exhibit excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good set of mechanical properties, strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.14 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
平衡 balance |
1.3 | % | ASTM D570 |
相对粘度 Relative viscosity 2 |
2.7 | ASTM D789 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服,23℃ Yield, 23 ℃ |
78.0 | MPa | ASTM D638 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
56 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔融峰值温度 Melting peak temperature |
℃ | ASTM D2117 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 SAV @ 98% Sulfuric Acid |
【新闻资讯】查看全部
国内油价调整或将迎年内第三次搁浅
2021-08-09 搜料网资讯: 记者从多家社会监测机构了解到,8月9日24时国内新一轮调价窗口将开启,从目前的原油变化率来看,油价调整或搁浅,这也将是本年度第三次搁浅。 近期国际原油市场整 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |