牌号简介 About |
---|
Borlink™ LE4201R是一种可交联的天然聚乙烯化合物,专门为能源电缆的绝缘设计。 Borlink LE4201R is a crosslinkable natural polyethylene compound, specially designed for insulation of energy cables. Applications Borlink LE4201R is intended for insulation of XLPE power cables with rated voltages up to 72 kV. Specifications Borlink LE4201R meets the applicable requirements as below when processed using sound extrusion practices and testing procedures Cenelec HD 620 S1, Part 1, table 2A, DIX 3 to 14 ICEA S-108-720 IEC 60502-2 IEC 60840 |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.922 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
2.0 | g/10min | ISO 1133 |
Moisture Moisture |
< 200 | ppm | Karl Fisher |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
> 17.0 | MPa | ISO 527-2/250 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
> 450 | % | ISO 527-2/250 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固性 thermosetting 2 |
IEC 60811-507 | ||
负荷下伸长率:200℃ Elongation under load: 200 ℃ |
% | IEC 60811-507 | |
永久变形:200℃ Permanent deformation: 200 ℃ |
% | IEC 60811-507 | |
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Change in Tensile Strain at Break in Air(135℃,168 hr) Change in Tensile Strain at Break in Air(135℃,168 hr) |
% | IEC 60811-401 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | IEC 60093 | |
介电强度 Dielectric strength 3 |
kV/mm | IEC 60243-1 | |
介电常数 Dielectric constant |
|||
50 Hz 50 Hz |
IEC 60250 | ||
耗散因数 Dissipation factor |
|||
50 Hz 50 Hz |
IEC 60250 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Gottfert Elastograph Gottfert Elastograph |
N·m | ISO 6502 | |
Methanol Wash Methanol Wash |
ppm | Internal Method | |
焦化时间 Coking time |
|||
t10 t10 |
sec | ISO 6502 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 0.20 MPa |
3 50 Hz |
【新闻资讯】查看全部
几分钟内就可制造出高性能热塑性复合材料,研究人员开发使用混合纳
2022-05-11 德克萨斯 AM 大学的研究人员开发了一种使用混合纳米材料的方法,能够在几分钟内制造出具有良好机械性能的高性能热塑性复合材料。 纤维增强热塑性塑料因其固有的特性正在高速取 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |