牌号简介 About |
---|
刚性DI-PAK R-4525系列A通用系列低粘度、强力、灌封和封装化合物。DI-PAK R-4525具有优异的电绝缘性能,并能很好地与许多基板结合。通过改变固化剂,可以获得理想的固化和使用寿命。 RIGID DI-PAK R-4525 Series A general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.51 | g/cm³ | ASTM D4669 |
收缩率 Shrinkage rate |
|||
MD MD |
0.050 到 0.20 | % | ASTM D2566 |
Weight(per cubic inch) Weight(per cubic inch) |
25 | g | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
24 | J/m | ASTM D256 |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
35 | J/m | ASTM D256 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
100 kHz 100 kHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
25℃,100 kHz 25℃,100 kHz |
ASTM D150 | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
cP | ASTM D4878 | |
脱模时间 stripping time |
|||
21℃ 21℃ |
min | ||
66℃ 66℃ |
min | ||
胶凝时间 Gelation time 2 |
|||
25℃ 25℃ 2 |
min | ASTM D2971 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
导热系数 Thermal conductivity coefficient |
W/m/K | ||
使用温度 Operating temperature |
℃ | ||
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
备注 |
---|
2 100 g |
【新闻资讯】查看全部
疫情拐点将至?复工在即!塑料企业仍需努力抗疫!
2020-02-13 疫情对塑料企业而言,无论是心理上还是策略上都没有做好有效准备,尤其是现金储备不足。制造业不仅是吸纳就业的“主力军”,更是激励创新、带动投资、促进消费的重要“生力军 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |