牌号简介 About |
---|
本产品为聚氨酯系统。如果产品在室温下固化,在固化后7天内,无整个化学和机械负荷。由于原料的原因,产品可能会发生颜色变化,但这些颜色变化对产品的质量和性能没有影响。应用浇注型混凝土浇注型水泥浇注型石膏性能邵尔A硬度约55优良流动性能好撕裂扩展阻力快脱模低吸收性好耐化学性好除气 This product is a polyurethane system. If the product is cured at room temperature, no entire chemical and mechanical load before 7 days after curing. The product can be subject to colour variations due to raw materials, but these colour variations have no influence on the quality and the properties of the product. Applications Casting moulds for concrete Casting mould for cement Casting mould for gypsum Properties shore A hardness about 55 excellent flow properties good tear propagation resistance fast demolding low absorption good chemical resistance good degasing |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
52 到 58 | ISO 7619 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
3.30 到 4.30 | MPa | ISO 37 |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
360 到 440 | % | ISO 37 |
撕裂强度 tear strength |
ISO 34-1 | ||
1.00 mm 1.00 mm 3 |
5.5 到 6.5 | kN/m | ISO 34-1 |
1.00 mm 1.00 mm 4 |
17 到 19 | kN/m | ISO 34-1 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
g/cm³ | ||
粘度 viscosity |
|||
25℃ 25℃ |
Pa·s | ||
固化时间 Curing time |
|||
20℃ 20℃ |
hr | ||
储存稳定性 storage stability 5 |
|||
20 ℃ 20 ℃ 5 |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 2 |
3 Arch shaped test piece without incision |
4 Arch shaped test piece with incision |
5 200 g |
【新闻资讯】查看全部
山东抽查食品用塑料包装、容器、工具产质量量
2016-01-06 2016年01月04日,山东省质量技术监督局在其官网公布2015年第3批食品用塑料包装、容器、工具产品质量省监督抽查结果,有18家企业的18批次产品不符合相关标准的要求。 2015年第3季度,山东省质量技术监督局组织开展了食品用塑料包装、容器、工具等制品产品质量省监督抽查。本次共抽查了全省807家企业生产的 832批次商品零售包装袋、包装用镀铝薄膜、包装用聚乙烯吹塑薄膜、液体包装用聚乙烯吹塑薄膜、普通用途双向拉伸聚丙烯(BOPP)薄膜、塑料一次性餐饮具、聚酯(PET)无汽饮 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |