牌号简介 About |
---|
0513F、0814F、0822F、1020F、1640F I 2040F型合成EPS/CZ是一种自熄型可膨胀聚苯乙烯EPS,戊烷含量高。这些材料是由球形聚苯乙烯颗粒形成的,这些颗粒含有阻燃系统(HBCD含量<0.5%)和碳氢化合物发泡剂。它们的表面经过处理,以防在加工和静电形成过程中发生粘合。由于卤代阻燃剂和残留发泡剂的含量,本产品不适合直接接触食品的物品。Synthos EPS® 0513F/CZ(Koplen 0513F)主要用于生产壁厚大于10 mm的成型件(例如玻璃和电气产品的运输包装、建筑砖、地板和屋顶成型件);生产密度更高或切割轮廓更小的砌块。 Synthos EPS®/CZ types 0513F, 0814F, 0822F, 1020F, 1640F i 2040F are self-extinguishing expandable polystyrene EPS with high content of pentane. The materials are formed by spherical polystyrene particles that contain a flame retardant system (content of HBCD < 0,5%) and a hydrocarbon blowing agent. Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. Synthos EPS® 0513F/CZ (Koplen 0513F) is mainly used for production of shaped parts with wall thickness above 10 mm (e.g. shipping packaging for glass and electrical goods, building bricks, floor and roof shaped parts); production of smaller blocks with higher density or cutted profiles. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表观密度 Apparent density 2 |
0.02 到 0.04 | g/cm³ | 内部方法 |
含水率 Moisture content |
< 10000 | ppm | 内部方法 |
颗粒大小 Particle size |
|||
>95% between >95% between |
500 到 1000 | µm | 内部方法 |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Reaction to Fire Reaction to Fire |
|||
-- -- |
Class E | EN 13501-1 | |
-- -- |
B1 | DIN 4102 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Blowing Agent Blowing Agent |
wt% | 内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 The typical bulk density indicates values obtained during single-step pre-foaming on continuous pre-foaming devices Lower values of bulk density can be achieved only after multiple pre-expansion. |
【新闻资讯】查看全部
模具对钢材有六大功能要求
2016-07-06 1、硬度 模具在工作时受力状态是复杂的,如热作模具通常是在交变的温度场下承受交变应力作用,因此它应具有良好的抗软化或塑性变形状态的能力,在长期工作环境下仍能保持模具的形状和尺寸精度。硬度是模具钢的重要性能之一。对冷作模具的硬度一般选择在58HRC以上,而热作模具尤其是要求高的抗热疲劳性能的模具,通常硬度在45HRC左右。对普通使用的塑料模具,一般硬度要求在35HRC左右。 2、强度与韧度 零件的成型使模具承受着巨大的冲击、扭曲等负荷,尤其是现 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |