牌号简介 About |
---|
Derakane 470HT-400环氧乙烯基酯树脂是一种以酚醛环氧树脂为基础的树脂,其设计旨在提供最大的耐化学性,同时具有优异的温度性能。Derakane 470HT-400树脂在较宽的温度范围内对强酸、氧化介质和有机溶剂具有优异的抵抗力。应用和使用Derakane 470HT-400树脂是高操作/顶锻温度应用的首选。这种树脂的设计是为了便于使用手工铺层、喷涂、纤维缠绕、压缩成型和树脂转移成型技术制造。Derakane 47oht-400树脂在烟囱衬里、淬火容器和需要高温要求的管道上成功使用了近20年,具有良好的历史记录。 DERAKANE 470HT-400 epoxy vinyl ester resin is a novolac-epoxy based resin, designed to provide maximum chemical resistance in combination with superior temperature performance. DERAKANE 470HT-400 resin shows outstanding resistance to strong acids, oxidizing media and organic solvents over a wide temperature range. APPLICATIONS AND USE DERAKANE 470HT-400 resin is the preferred choice for applications with high operating/upset temperatures. This resin is designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression molding and resin transfer molding techniques. DERAKANE 47OHT-400 resin has a proven track record with over almost 2 decades successful use for chimney liners, quench vessels, and ducting where high temperature requirements are needed. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.17 | g/cm³ | ASTM D792 , ISO 1183 |
溶液粘度 Solution viscosity |
430 | mPa·s | |
苯乙烯含量 styrene content |
33 | % | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
182 | ℃ | ASTM D648 |
1.8 MPa,未退火 1.8 MPa, unannealed |
180 | ℃ | ISO 75-2/A |
玻璃化转变温度 Glass transition temperature |
|||
-- -- |
℃ | ASTM D3418 | |
-- -- |
℃ | ISO 11357-2 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积收缩 Volume contraction |
% | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
巴氏硬度 Babbitt hardness |
ASTM D2583 | ||
拉伸模量 Tensile modulus |
|||
-- -- |
MPa | ASTM D638 | |
-- -- |
MPa | ISO 527-2 | |
拉伸强度 tensile strength |
|||
-- -- |
MPa | ASTM D638 | |
-- -- |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D638 , ISO 527-2 | |
弯曲模量 Bending modulus |
|||
-- -- |
MPa | ASTM D790 | |
-- -- |
MPa | ISO 178 | |
弯曲强度 bending strength |
|||
-- -- |
MPa | ASTM D790 | |
-- -- |
MPa | ISO 178 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
伊朗顶级核专家被刺杀后,国际油价将如何反应?
2020-12-02 搜料网资讯: 这几天,伊朗核科学家被暗杀的消息震惊全球,从年初到年末伊朗可谓一波未平一波又起!如果说2020年之前的每一年都是闯关,那么2020一开年,直接就把难度调成了最高 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |