牌号简介 About |
---|
CONAPOXY® FR-1274是一种双组分、低温、阻燃、使用寿命长的环氧灌封和浇注系统。由于其优良的抗热震性,CONAPOXY® FR-1274被推荐用于应变敏感器件的封装。CONAPOXY® FR-1274也是一个很好的封装和封装电气/电子设备的系统,如模块、变压器和线圈。低成本,低放热,低收缩,阻燃性好,导热性好,方便体积或重量的1:1混合比非研磨填料,用于机器计量和分配,使用寿命长,室温或高温固化,具有优异的抗热震性。 CONAPOXY FR-1274 is a two-component, low exotherm, flame retardant, long pot life epoxy potting and casting system. Because of its excellent thermal shock resistance, CONAPOXY FR-1274 is recommended for the encapsulation of strain sensitive devices. CONAPOXY FR-1274 is also an excellent system for potting and encapsulating electrical/electronic devices such as modules, transformers, and coils. Low cost, low exotherm, low shrinkage Flame retardant Good thermal conductivity Convenient 1-to-1 mix ratio by volume or weight Non-abrasive filler for machine metering and dispensing Long pot life and room or elevated temperature cure Excellent thermal shock resistance |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- 3 |
1.60 | g/cm³ | |
-- -- |
1.66 | g/cm³ | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
3.0E+17 | ohms | |
体积电阻率 Volume resistivity |
8.0E+14 | ohms·cm | |
介电强度 Dielectric strength |
16 | kV/mm | |
介电常数 Dielectric constant |
|||
25 ℃,100 Hz 25 ℃,100 Hz |
|||
25 ℃,1 kHz 25 ℃,1 kHz |
|||
25 ℃,1 MHz 25 ℃,1 MHz |
|||
耗散因数 Dissipation factor |
|||
25℃,100 Hz 25℃,100 Hz |
|||
25℃,1 kHz 25℃,1 kHz |
|||
25℃,1 MHz 25℃,1 MHz |
|||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
3.00 mm 3.00 mm |
UL 94 | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ 4 |
cP | ||
25℃ 25℃ 3 |
cP | ||
25℃ 25℃ 5 |
cP | ||
脱模时间 stripping time |
|||
25℃ 25℃ |
min | ||
60℃ 60℃ |
min | ||
80℃ 80℃ |
min | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
放热峰值 exothermic peak |
|||
200 gram mass 200 gram mass |
℃ | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Linear Shrinkage Linear Shrinkage |
% | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
拉伸强度 tensile strength |
MPa | ||
压缩强度 compressive strength |
MPa | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ||
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
储存稳定性 storage stability |
|||
25 ℃ 25 ℃ |
min | ||
贮藏期限 Storage period |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Mix |
3 Hardener |
4 Resin |
【新闻资讯】查看全部
中原石化乙烯双烯收率指标创佳绩
2022-02-11 1月,中原石化持续强化精益管理、优化原料结构、调整裂解深度,乙烯装置的乙烯收率、双烯收率均排名化工企业第一名,实现开门红。 乙烯收率、双烯收率是衡量乙烯装置运行水平 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |