牌号简介 About |
---|
Witcom PEEK 3C/3L1-EM是一种聚醚醚酮(PEEK)产品,含有的填充物为15% 碳纤维增强材料。 它可以通过注射成型进行加工,在欧洲有供货。 特性包括: 阻燃/额定火焰 传导性 加工性能良好 润滑 Witcom PEEK 3C/3L1-EM is a Polyetheretherketone (PEEK) product filled with 15% carbon fiber. It can be processed by injection molding and is available in Europe. Characteristics include: Flame Rated Conductive Good Processability Lubricated |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.44 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate |
0.3-0.5 | % | ISO 2577 |
吸水率 Water absorption rate |
|||
饱和,23℃ (23°C, 饱和) |
0.40 | % | ISO 62 |
23℃,50% RH 23℃,50% RH |
0.20 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
23℃ 23℃ |
150 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ISO 527-2 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ISO 178 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ISO 178 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,退火 1.8 MPa, annealed |
℃ | ISO 75-2/Af | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ISO 11359-2 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
|
V-0 | UL 94 | |
灼热丝起燃温度 Igniting temperature of the hot wire |
|||
1.6 mm 1.6 mm |
℃ | IEC 60695-2-12 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
kJ/m² | ISO 180-1A | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃ 23℃ |
kJ/m² | ISO 180/1U |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
SABIC 具有LDS特性的LNP™ THERMOCOMP™改性料助力驰科(Cicor)实现细间距
2021-09-03 搜料网资讯: 荷兰, 2021年9月2日 - 印制电路板与混合电路的领先制造商驰科集团(Cicor)采用具备LDS(激光直接成型)特性的SABIC LNPTHERMOCOMP改性料,生产高端三维模塑互连器件 (3D-MID)。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |