公司信息及水印
牌号简介 About |
---|
CONTINUUM™ DGDA-2420 NT 双峰聚乙烯树脂是采用UNIPOL™ II 工艺技术来制备的。这种产品的配方中带有一种紫外线稳定剂,用于室外存放。这种产品可应用于管道领域,这些管道应用领域既要求长期的流体静力强度,也要求优异的耐慢速裂纹增长和耐快速裂纹扩展性能。其适用的应用领域包括有天然气配送管道、灌溉和滴灌管路等。 业界标准的合规性: ASTM D 3350:元件分类 PE234373E ISO PE 80 管件牌号 ASTM PE 2708 管件牌号 - 1250 psi HDB @ 73F,800 psi HDS @ 73F和1000 psi HDB @ 140F 请查询法规以获取完整的详细资料。 CONTINUUM™ DGDA-2420 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product is formulated with a UV stabilizer for outdoor storage. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, irrigation and drip tube. Industrial Standards Compliance: ASTM D 3350: cell classification PE234373E ISO PE 80 pipe grade ASTM PE 2708 pipe grade - 1250 psi HDB @ 73F, 800 psi HDS at 73F, and 1000 psi HDB at 140F Consult the regulations for complete details. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.941 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
ASTM D1238 | ||
190℃,2.16kg 190℃,2.16kg 2 |
0.16 | g/10min | ASTM D1238 |
190℃,21.6kg 190℃,21.6kg 3 |
9.5 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 4 |
|||
屈服 yield 4 |
> 17.9 | MPa | ASTM D638 |
拉伸应变 Tensile strain 4 |
|||
断裂 fracture 4 |
> 600 | % | ASTM D638 |
弯曲模量 Bending modulus 5 , 4 |
|||
2% 正割 2% secant 5 , 4 |
MPa | ASTM D790-B | |
切口管材慢速裂纹增长 Slow crack growth in cut pipe materials |
|||
Notched Pipe Test Notched Pipe Test 6 |
hr | ISO 13479 | |
裂纹缓慢扩展 PENT Slow crack propagation PENT 4 |
hr | ASTM F1473 | |
抗快速裂缝扩展 Resistance to rapid crack propagation |
|||
Pc Pc |
|||
S-4:0℃ S-4:0℃ 7 |
bar | ISO 13477 | |
已计算,全刻度:0℃ Calculated, full scale: 0 ℃ 8 |
bar | ISO 13478 | |
抗快速裂缝扩展,Tc - S-4 @ 5 巴 Anti rapid crack propagation, Tc-S-4 @ 5 bar 7 |
℃ | ISO 13477 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature 4 |
℃ | ASTM D746A | |
热稳定性 thermal stability |
℃ | ASTM D3350 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Melt Index |
3 Flow Index |
4 根据 ASTM D 4703 程序 C 准备压缩模塑配件,除非测试方法中另有说明。属性将随着模塑条件和老化时间的变化而变化。 |
5 方法 I (三点负荷) |
6 Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
7 管道直径为 12 英寸 IPS (30.5 cm),标准直径比 (SDR) 为 11.5。 |
8 根据 S-4 测试数据,计算的值由 ISO 4437 中的方程式确定。 管道直径为 12 英寸 IPS (30.5 cm),标准直径比 (SDR) 为 11.5。 |
【新闻资讯】查看全部
生物降解塑料适用于一次性塑料用品指令!欧盟新出台的指导意见释放
2021-06-09 搜料网资讯: 近日,欧盟委员会就欧盟一次性塑料用品的指令(the Single-Use Plastics (SUP) Directive,下称SUP指令)出台了指导意见(下称指导意见),并通过一项关于监测和报告投放在市场 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |