牌号简介 About |
---|
热稳定,高冲击改性尼龙,适用于成型和挤压。除了热稳定性以防止热降解外,743hs成型的零件在不经过后处理的情况下具有优异的R.T.和C.T.冲击强度。Nylene® 743HS的突出特点包括高强度和高低温冲击。气缸温度应在435-525°F范围内。 Heat stabilized, high impact modified nylon suitable for both molding and extrusion. In addition to heat stabilization to prevent thermal degradation, parts molded from 743HS have excellent R.T. and C.T. impact strength right out of the mold without post conditioning. Outstanding features of Nylene 743HS include high strength and high cold temperature impact. Cylinder temperatures should be in the 435 - 525°F range. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.07 | g/cm³ | ASTM D792 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
23℃ 23℃ |
53.1 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
150 | % | ASTM D638 |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
1590 | MPa | ASTM D790 |
弯曲强度 bending strength |
|||
23℃ 23℃ |
62.1 | MPa | ASTM D790 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-40℃ -40℃ |
J/m | ASTM D256 | |
23℃ 23℃ |
J/m | ASTM D256 | |
ARM冲击 ARM Impact |
ARM | ||
-40℃ -40℃ |
J | ARM | |
-30℃ -30℃ |
J | ARM | |
23℃ 23℃ |
J | ARM | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔融峰值温度 Melting peak temperature |
℃ | ASTM D3418 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
美方称台积电等企业“自愿”上交关键数据 台网友怒了
2021-11-10 搜料网资讯: 国以应对全球芯片危机为名,向芯片相关企业勒索机密数据,8日是其设定的最后期限。此前一天,台积电确认,已经回应美方要求,上交数据。据台湾中央社报道,美国商 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |