牌号简介 About |
---|
TIPPLEN® R 351 F是一种无规共聚物聚丙烯,具有防滑和防堵包装。产品透明度高,光泽度高,热焊性好。密封起始温度约为136°C。建议将TIPPLEN® R 351 F用于挤压铸造和水淬火吹塑薄膜。适用于饼干、糖果、面食、茶叶等食品的包装,也适用于文具、衬衫等的包装。TIPPLEN® R 351 F也可作为单层膜或共挤结构中的焊接层进行优质包装。TIPPLEN® R 351 F由于具有良好的热焊接性,非常适合于PP薄膜或其他材料(如PA、聚酯或铝)的层压,以形成密封层。TIPPLEN® R 351 F适用于食品接触。产品符合食品接触法规。 TIPPLEN R 351 F is a random copolymer polypropylene with a slip and antiblock package. The product shows high transparency and gloss and very good heat weldability. The seal initiation temperature is about 136 °C. TIPPLEN R 351 F is recommended for extrusion of cast and water-quenched blown films. It is well suited for the packaging of foodstuff such as biscuits, sweets, pasta, tea and for the packaging of stationary, shirt etc. TIPPLEN R 351 F is also recommended for quality packaging either as monolayer film or as welding layer in coextruded structures. Because of the excellent heat weldability, TIPPLEN R 351 F is well suited for lamination of PP film or other materials such as PA, polyester or aluminium to form the sealing layer. TIPPLEN R 351 F is suitable for food contact. The product complies with Food Contact Regulations. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
8.5 | g/10min | ISO 1133 |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
始封温度 Initial sealing temperature |
136 | ℃ | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,注塑成型 23 ℃, injection molding |
5.0 | kJ/m² | ISO 180-A |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
74.0 | ℃ | ISO 75-2/B |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
注塑成型 injection molding |
900 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
屈服,注塑成型 Yield, injection molding |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
|||
注塑成型 injection molding |
MPa | ISO 178 | |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ISO 2039-2 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
拓斯达切入印刷包装业 助力中小企业转型升级
2021-08-17 搜料网资讯: 中国是全球第二包装大国。印刷包装行业在我国国民经济占有很大比重,行业年产值超过1.6万亿。近年来,随着劳动力短缺、成本上涨、供应链断档等因素的影响,传统劳 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |