牌号简介 About |
---|
DI-PAK E-4568是一种用于短期和长期生产的坚固、可修复、抗冲击的封装化合物。DI-PAK E-4568具有优异的绝缘性能,水分蒸汽传输率极低,可在-60°C至+100°C的温度范围内工作,并可在潮湿和干燥环境中工作。它可以很容易地用刀修剪,使修理迅速而容易。 DI-PAK E-4568 A tough, REPAIRABLE, shock resistant potting compound for short and long run productions. DI-PAK E-4568 has excellent insulating properties, a very low moisture vapor transmission rate, can be operated from -60°C to +100°C, and performs in both wet and dry environments. It can be easily trimmed with a knife, making repairs quick and easy. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.928 | g/cm³ | ASTM D4669 |
收缩率 Shrinkage rate |
|||
MD MD |
0.050 到 0.15 | % | ASTM D2566 |
Weight(per cubic inch) Weight(per cubic inch) |
15 | g | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
无断裂 | ASTM D256 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
无断裂 | ASTM D256 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
100 kHz 100 kHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
25℃,100 kHz 25℃,100 kHz |
ASTM D150 | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
cP | ASTM D4878 | |
脱模时间 stripping time |
|||
21℃ 21℃ |
min | ||
胶凝时间 Gelation time 2 |
|||
25℃ 25℃ 2 |
min | ASTM D2971 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
冷热冲击测试 Test Cold and hot shock test |
|||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
导热系数 Thermal conductivity coefficient |
W/m/K | ||
使用温度 Operating temperature |
℃ | ||
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 100 g |
【新闻资讯】查看全部
“辉隆塑机”3100mm宽幅双联双共挤 挤出复合生产线验收成功
2021-11-07 搜料网资讯: 近日,出口印度的辉隆双联双共挤挤出复合生产线验收成功!这也是辉隆宽幅最大挤出复合生产线,复合宽度达3000mm,设备主要用于 PP 编织布和PP无纺布复合,辊筒宽度 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |