牌号简介 About |
---|
PureTherm® 1001C White Opaque是一种硬聚氯乙烯薄膜,在临界紫外290-450纳米范围内,透射值低于美国药典标准10%。该膜与puretherm 1001C相同,添加白色颜料,以便于包装光敏药品,或者在需要的情况下,泡罩内容物不可见。puretherm 1001C的应用包括片剂、胶囊、含片、栓剂的泡罩包装,以及分层使用。 PureTherm® 1001C White Opaque is a rigid PVC film with transmission values below the USP standard of 10% in the critical ultraviolet 290 — 450 nm range. This film is the same as PureTherm® 1001C with the addition of white pigment to allow for the packaging of light sensitive pharmaceutical products or where it is desirable that the blister contents are not visible. Applications for PureTherm® 1001C include blister packaging of tablets, capsules, lozenges, suppositories as well as use in laminations. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.33 | g/cm³ | |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
薄膜厚度 film thickness 2 |
127 到 1020 | µm | |
拉伸强度 tensile strength |
|||
MD,屈服 MD, yield |
48.0 | MPa | ASTM D882 |
透氧度(湿)(23℃,250 µm,100% RH) Oxygen permeability (wet) (23 ℃, 250 µ m, 100% RH) |
18.1 | cm³/m²/24 hr | ASTM F1927 |
水蒸气透过性 Water vapor permeability 3 |
3.1 | g/m²/24 hr | ASTM E96 |
自由收缩 Free contraction |
% | ASTM D2732 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
℃ | ASTM D1637 | |
冷冲击 Cold shock |
|||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Roll Width Roll Width 4 |
cm | ||
热成型模具温度 Temperature of hot forming mold |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Thickness tolerance: ±10% |
3 at 10 mil at 38°C, 90% RH |
4 Roll width tolerance: ±1.5 mm |
【新闻资讯】查看全部
上汽高层大换血,王晓秋能否带上汽站着“活下去”?
2019-07-26 车市第10个月销量下滑,让经销商大出血的换国六热潮后,6月份汽车销量有所反弹,取得今年以来的首次增长。 据乘车联数据显示,上汽汽车销量一直居于国内销量榜首。 7月4日,上汽 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |