牌号简介 About |
---|
Versalloy™ HC 9220-90 是一种 TPV 合金,具有极强的流动性和表面美学效果,适合于多种应用。 着色能力极强 可以重叠模塑方式粘接在聚丙烯上 表面美学效果极佳 Versalloy™ HC 9220-90 is a TPV alloy targeted for extrusion and injection molding healthcare applications such as medical tubing, disposable medical items and soft-touch overmolding for surgical grips. * Excellent Extrudability * Good Flow for Injection Molding * Exceptional Colorability * Overmold Adhesion to Polypropylene * Superior Surface Aesthetics |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,10 秒 Shore A, 10 seconds |
90 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 3 |
ASTM D412 | ||
TD,100% 应变,21℃ TD, 100% strain, 21 ℃ |
7.10 | MPa | ASTM D412 |
MD,100% 应变,21℃ MD, 100% strain, 21 ℃ 4 |
9.16 | MPa | ASTM D412 |
MD,300% 应变,21℃ MD, 300% strain, 21 ℃ 4 |
10.5 | MPa | ASTM D412 |
TD,300% 应变,23℃ TD, 300% strain, 23 ℃ 4 |
8.16 | MPa | ASTM D412 |
拉伸应变 Tensile strain 4 , 3 |
ASTM D412 | ||
TD,断裂,23℃ TD, fracture, 23 ℃ |
% | ASTM D412 | |
流量,断裂,21℃ Flow rate, fracture, 21 ℃ |
% | ASTM D412 | |
撕裂强度 tear strength |
ASTM D624 | ||
TD TD |
kN/m | ASTM D624 | |
MD MD |
kN/m | ASTM D624 | |
压缩形变 Compression deformation |
ASTM D395B | ||
23℃,22 hr 23℃,22 hr |
% | ASTM D395B | |
23℃,168 hr 23℃,168 hr |
% | ASTM D395B | |
70℃,22 hr 70℃,22 hr |
% | ASTM D395B | |
70℃,168 hr 70℃,168 hr |
% | ASTM D395B | |
100℃,22 hr 100℃,22 hr |
% | ASTM D395B | |
100℃,168 hr 100℃,168 hr |
% | ASTM D395B | |
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
g/cm³ | ASTM D792 | |
收缩率 Shrinkage rate |
ISO 294-4 | ||
TD TD |
% | ISO 294-4 | |
MD MD |
% | ISO 294-4 | |
熔体表观粘度 Apparent viscosity of melt |
|||
200℃,11200 sec^-1 200℃,11200 sec^-1 |
Pa·s | ASTM D3835 | |
特殊值 Special value |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
MD,断裂,21℃ MD, fracture, 21 ℃ |
MPa | ASTM D412 | |
TD,断裂,23℃ TD, fracture, 23 ℃ |
MPa | ASTM D412 |
备注 |
---|
1 Please contact PolyOne GLS Thermoplastic Elastomers for a complete copy of the GLS Healthcare Policy. 1. The Customer must notify GLS of any FDA Class I and/or European Union Class I medical devices for each specific product and application. 2. The Customer shall not knowingly manufacture, use, sell or otherwise supply, directly or indirectly products or compounds made from GLS products in any of the following without prior written approval by GLS for each specific product or application: a. Cosmetics b. Drugs and other Pharmaceuticals c. Temporary or permanent implantation in the human body, regardless of the intended duration of implantation d. Class II and Class III Medical Devices as defined in 21 CFR 860.3 ("Medical Devices") e. Class IIa, IIb and III as defined in Directive 93/42/EEC |
2 一般属性:这些不能被视为规格。 |
3 2 小时 |
4 C 模具 |
【新闻资讯】查看全部
重磅!科思创将在珠海兴建其全球最大TPU生产基地
2023-02-24 扫描上图二维码,可以免费下载 搜料 APP 2月23日科思创宣布将在广东珠海投资数亿欧元建造其最大的 热塑性聚氨酯(TPU)生产基地 ,这也将是 科思创TPU业务 的最大投资项目 TPU具备众 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |